The HS34 does not seem to get signal from 696. Continues to wait for fix.
Have configuration on serial 2 set to:
Garmin "NMEA In/Out" HS34 "NMEA 4800"
http://wiki.dynonavionics.com/Garmin_X96_Wiring indicates that the setting on the HS34 should be "Aviation 9600" which seems strange.
Is the problem enhanced because the HS34 is smart enough to see that the 696 is running in simulation mode as we didn't pull the aircraft outside to get a fix on the 696?
Have configuration on serial 2 set to:
Garmin "NMEA In/Out" HS34 "NMEA 4800"
http://wiki.dynonavionics.com/Garmin_X96_Wiring indicates that the setting on the HS34 should be "Aviation 9600" which seems strange.
Is the problem enhanced because the HS34 is smart enough to see that the 696 is running in simulation mode as we didn't pull the aircraft outside to get a fix on the 696?