N714b
RV-8A
Has anyone successfully connected a 480 to Skyview using the wiring diagram in the SV installation manual? If so, what settings did you use on the 480 and SV?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
GNS480 Interface
- Thread starter N714b
- Start date
N714b
RV-8A
Bumping this up to the smart guys at Dynon Support. Can you help me out here?
Bob, I also have a 480. I looked to see your email to send you a copy of settings I got from the Yahoo 480 Users Group but it was not listed. The Skyview Installation Manual has a diagram showing the connection of the 480 to the ARINC 429 adapter. If that does not answer your questions, shoot me an email and I will send along the note I mentioned previously.
- Joined
- Mar 23, 2005
- Messages
- 13,226
Here's the settings that work with the HS34, which you should be able to adapt for SkyView. Should be a good starting point, anwway: http://wiki.dynonavionics.com/Garmin_480_Wiring. You want to look at the second table.