marc.dahlet
New Member
- Joined
- Sep 20, 2008
- Messages
- 21
Hello,
Actually, temperatures are low (14°F). Last week-end, when starting on EFIS D 100 and EMS D 120, I observed :
-EMS D 120 display is immediately normal
-EFIS D100 : nothing for 3-4 minutes, then display appears. Later, I have observed horizontal white lines, but each value in the instruments was correct.WHen I stopped the engine and turned off everything else than EFIS, the problem was the same.
May these problems be in relation with low temperature ?
Thanks
Marc
Actually, temperatures are low (14°F). Last week-end, when starting on EFIS D 100 and EMS D 120, I observed :
-EMS D 120 display is immediately normal
-EFIS D100 : nothing for 3-4 minutes, then display appears. Later, I have observed horizontal white lines, but each value in the instruments was correct.WHen I stopped the engine and turned off everything else than EFIS, the problem was the same.
May these problems be in relation with low temperature ?
Thanks
Marc