OIL TEMP ERRATIC AND READS HIGH

X

Xtremeair

New Member
Joined
Jul 2, 2023
Messages
1
I have read several posts that identify the Dynon supplied oil temp sensor as a problem. I have a Skyview Touch and my oil temp has begun to read high to off the scale and everywhere in between. The resolution appears to be replacing the sender with the 2 wire GRT unit which I have done. I assumed the grey wire was the sender wire and the black wire ground. When powered up the oil temp reads -14. Anyone know the fix for this? I assume its a configuration issue but I don't see a way to solve it.
Thanks,
Brad
 
G

GKC Aviation

Active Member
Joined
Oct 4, 2020
Messages
149
Did you set your connected sensor up as type 3 on the GP contact you connected it to?

1758232752745.png


The GRT sensor has different resistance values to the original Dynon one.

You are correct about the black wire being ground. I would run it back to one of the EIS grounds.
 
You must log in or register to reply here.
Top