Maidna@comcast.net
I love flying!
- Joined
- Jun 16, 2018
- Messages
- 4
I wanted to confirm that the PALT column in an exported SV data log is reporting pressure altitude, not the reading on the altimeter display the pilot sees (unless the altimeter is set to 29.92 inHg, of course...)
This is probably obvious, but I was unable to find documentation in Skyview Manuals, or an answered question from searching the Dynon Forum....
This is probably obvious, but I was unable to find documentation in Skyview Manuals, or an answered question from searching the Dynon Forum....