I have a 10A and 10. They are connected to my Garmin 430 via my HS34. The GPS works o.k. and displays both on the HSI and PFD pages. The localizer works so-so (the course line does not seem to move much until I just about intercept the localizer.) The most serious problem is with the VOR from the 430.
When I toggle via the HS34 to the nav mode I cannot get the Nav screen nav [ch9674] to show anything. If I push NAV source the green word “NAV” lights up momentarily but then goes out. I do not have a second nav to fill in the SBY circle.
The HSI arrow cannot be utilized to show the course to or from the VOR. I turn the HG34 course knob a full 360° and the segment remains out of the arrow line and does not cross through it. As I fly, occasionally the broken center segment flips from top to bottom but never displays radial passage.
I have confirmed I am receiving the VOR as I get the audio form it.
Any ideas?
When I toggle via the HS34 to the nav mode I cannot get the Nav screen nav [ch9674] to show anything. If I push NAV source the green word “NAV” lights up momentarily but then goes out. I do not have a second nav to fill in the SBY circle.
The HSI arrow cannot be utilized to show the course to or from the VOR. I turn the HG34 course knob a full 360° and the segment remains out of the arrow line and does not cross through it. As I fly, occasionally the broken center segment flips from top to bottom but never displays radial passage.
I have confirmed I am receiving the VOR as I get the audio form it.
Any ideas?