I have reviewed some of the previous discussions on this but did not see a wiring diagram. Would appreciate a actual diagram for time savings.........I have lots to do! Thank you.
I've spent the last week trying to figure this out. Wiring the Ray Allen trim to the Dynon autopilot as shown in the Dynon wiring diagram WILL NOT WORK unless you take apart the Ray Allen trim switch and re-wire it. You'll need to remove the red power wire, and then move the black ground wire.
I have a Dynon HDX system. My standard pitch trim for the aircraft has been a simple panel mounted Ray Allen rocker switch connected to a tail mounted Ray Allen servo. It has worked well, the rocker switch is a momentary switch which moves the servo while the rocker switch is held in the...
I've spent the last week trying to figure this out. Wiring the Ray Allen trim to the Dynon autopilot as shown in the Dynon wiring diagram WILL NOT WORK unless you take apart the Ray Allen trim switch and re-wire it. You'll need to remove the red power wire, and then move the black ground wire.
I have a Dynon HDX system. My standard pitch trim for the aircraft has been a simple panel mounted Ray Allen rocker switch connected to a tail mounted Ray Allen servo. It has worked well, the rocker switch is a momentary switch which moves the servo while the rocker switch is held in the...
Mine worked exactly as per the installation manual using the autopilot panel and the Ray Allen servo unit. Not sure why you would need to change anything. So I have to disagree with your statement.
forum.flydynon.com