Ring Terminal Source For #4 screw

Dynon101

I love flying!<br />
Joined
Mar 5, 2016
Messages
382
Has someone connected a wire to the #4 boss on the back of the display?

The manual says

>To minimize the possibility of audio “humming”, a 16 AWG wire may optionally be connected between the ground point for the intercom/audio panel/radio(s) and SkyView display case(s). To attach the wire to the rear of the SkyView display, a 4-40 x 3/16” long screw may be screwed into the threaded boss above the USB ports on the back of the SkyView display.

Firstly I am very surprised that the case of the display is not already grounded to the ground wires...seems really strange

Secondly...a #4 screw is really small and does anyone have a source for the ring terminal end that will have a hole small enough for a #4 screw and a crimp end big enough for a #16 wire?

THANKS
 

Dynon101

I love flying!<br />
Joined
Mar 5, 2016
Messages
382
I think I found some...all of the first pages of Google were for 4 AWG wires...a bit too big for the back of the display...
 
Top