Signposts

[diablouser]

I can't find any reference to signposts in the ver 15 manuals

Is there a way to turn the feature off? With no flight plan every airport seems to show. Is this correct?

Bruce Patton

 

[Raymo]

As noted in another thread, it cannot be disabled in the current version (15.4) but will be an option in an upcoming release.

 

[diablouser]

The change document for the -15 revision refers to this feature as a "signpost" so I searched the install, pilot's manual and the forum for signpost. No hits

Looks like the tech boys got ahead of the writers. Not a good thing. Just sitting in the hanger it shows more than eight airports cluttering up the nice picture. Real PITA. Can't wait til I can turn it off

 

[krw5927]

Completely agree. The airport signposts are probably the most annoying "feature" that's ever been dreamed up at Dynon. It might be ok for folks who mostly fly out west where the airports are few and far between, but it amounts to nothing but distracting screen clutter for many of us.

The ability to turn them off cannot come soon enough.

 

[dlloyd]

They are also on Gamin's G500. Looking at them 5 minutes was enough, turned 'em off.

 

[swatson999]

So, since the manuals are a bit behind the software...how *do* you turn these things off? I looked all through the menus and didn't find a way to do it, but then, I didn't want to spend a ton of time on it today

 

[skysailor]

With the latest software release the Signposts can be turned off. I believe it is under the PFD menu where you can also turn off HITS.

 

[skysailor]

I looked at this and it is not under PFD but is under Screen. I'm not near my plane but can give you the actual steps at the end of the week if you still need them. The Signpost toggle is on the same screen as the HITS. I did verify that.