SV-OAT-340 Connector and pins

[Dynon101]

I lost one of the SV-OAT-340 connectors for my two ADAHRS and cut the wires to length both pairs of wires to route the wires cleanly and therefore I need a plastic connector and set of crimp on pins.

I already Googled "SV-OAT-340 replacement pins" and even did a search on this site but did not come up with anything.

Are these items that can be purchased at a local radio Shack or are they Dynon proprietary items?

Thanks for your help!!!

 

[Raymo]

Call Dynon support. They'd be the only ones to know the P/N. You can likely get them from DigiKey or Mouser.

 

[mrdaud]

Happened to me a few years ago. Support sent me new connectors/pins free of charge. Call them.

 

[Dynon101]

Thanks...as advertised Dynon was kind enough to send me the replacement connectors.

BTW...they tols me that the connector is a Molex Micro-Fit PN:43645-0200 (DigiKey PN:WM1845ND), and the pins are PN:43030-0007 (DigiKey PN:WM1837-ND). You might be able to find these at a hobby shop that specializes in radio control cars and airplanes.