mikemalone
I love flying!
- Joined
- May 12, 2017
- Messages
- 36
I have Tosten Grips for Pilot and Copilot. There are various functions on the grips including a 4-way trim switch, PTT, Frequency Flip-Flop, Flaps Up/Down and AP Disconnect. However, there is only one common ground wire for each grip. According to the SV-Intercom-2S Installation Manual, when wiring the PTT on the grip switch, the ground should be wired to Pin-2 on the SV Intercom-2S with the other side of the PTT switches wired to SV-Intercom-2S Pins 10 (Pilot) and 16 (Copilot). My question is this; with only one ground wire for all stick functions is it OK to wire this to SV-Intercom-2S Pin 2?