Traffic monitoring not visible on the second display

[Aleksander Opoczynski]

To the existing instrument panel consisting of two HDX dispays configured as a copy, we have installed the traffic monitoring system. Unfortunately it shows traffic only on one display. How to propagate it to the second display?

 

[jakej]

First thing to do is make sure you have an ethernet cable conn to both screens & the ADSB unit is also connected to them as well using the same serial port number.

 

[skysailor]

If both of the suggestions above are done try checking the Layers button on the Map Menu to ensure Traffic/WX is selected on the other screen.

 

[chriscalandro]

I don’t think the Ethernet plays in here. Make sure the serial from the ADSB rx is wired to both panels correctly. check settings, should work.

 

[Aleksander Opoczynski]

Thank you very much. I will try it as soon as the weather is better. We have winter and snow here now

 

[Aleksander Opoczynski]

We did as jakej advised and it works! Thank you!

 

[djones]

Correct, Ethernet does not have anything to do with this.
This is all serial port wiring between the adsb module and both screens.

 

[Aleksander Opoczynski]

Yes, correct. I meant the serial ports wiring, not ethernet.