Latest activity

Then don't do that! :D

I've worked avionics for 48 years, and also had an IT career. If you did too, then you know what I said is true. It's very rare for a...

According to EarthX, the lead from the battery monitors voltage not temperature. When battery drops to 12.5v it sends a signal that will...

The EarthX battery BMS already monitors the temperature and will provide a light output that can be connected to your Skyview display...

I've worked avionics for 48 years, and also had an IT career. If you did too, then you know what I said is true. It's very rare for a...

The 680 manual describes the discrete output indications, but it's not entirely clear if they are the same as those on the battery...

Thanks, I followed that set-up, was more concerned the glowing light on the battery meant something was wrong, but seems that's just the...

Yes leave it blank or you will have (NOT SET) displayed in the contact. 

Under range 2 NAME = (NOT SET) does that mean not placing leaving that area blank?

The instructions that came with my new EarthX battery had very poor instructions for connecting the BMS lead to my Skyview EMS. Here...

See: https://forum.flydynon.com/threads/earthx-lithium-battery-bms-configuration.11789/

I have a EarthX Lithium battery which has an internal Battery Management System. The fault monitoring system lights a LED on the battery...

That comment is five years old. Some of their earlier flash drives did have issues, but they seem to be working just fine for a few...

I have to admit I was a little hasty in my critique of Dynon on this issue. I haven't flown small private aircraft in over 35 years so...

Much better than $250.