Latest activity

Respectfully, your conversation with Dynon and subseuent installation is more recent. This topic represents a lengthy history on the...

The interesting thing, is I bet you cannot find any differences in Auto Pilot setup in you deb, vs. approved Deb. All FAA BS!!! unlike...

In addition to the EGT/CHT inputs, there are two other general purpose thermocouple inputs on the EMS220. Of course if you have a 4 cyl...

Did you see this alternative if a new one is needed...

Then don't do that! :D

I've worked avionics for 48 years, and also had an IT career. If you did too, then you know what I said is true. It's very rare for a...

According to EarthX, the lead from the battery monitors voltage not temperature. When battery drops to 12.5v it sends a signal that will...

The EarthX battery BMS already monitors the temperature and will provide a light output that can be connected to your Skyview display...

I've worked avionics for 48 years, and also had an IT career. If you did too, then you know what I said is true. It's very rare for a...

The 680 manual describes the discrete output indications, but it's not entirely clear if they are the same as those on the battery...

Thanks, I followed that set-up, was more concerned the glowing light on the battery meant something was wrong, but seems that's just the...

Yes leave it blank or you will have (NOT SET) displayed in the contact. 

Under range 2 NAME = (NOT SET) does that mean not placing leaving that area blank?

The instructions that came with my new EarthX battery had very poor instructions for connecting the BMS lead to my Skyview EMS. Here...

See: https://forum.flydynon.com/threads/earthx-lithium-battery-bms-configuration.11789/