Latest activity

I have a very similar problem and continue getting the Database not current message at startup. I can live with it but I'd rather not! I...

CPDLC!! Controller-Pilot Data Link Connection - the ability to "text" ATC messaging back and forth instead of tying up the frequency...

Next time I'm at the bird I'll try and check what I see on my Dynon Skyview classic (same EMS) with the master bus off. I suspect the...

That brings back memories. Glad you got the config file sorted out.

It can be done, but I'm pretty sure it's not part of the normal menu system. I think you'd have to contact Dynon for that.

CPDLC!! Controller-Pilot Data Link Connection - the ability to "text" ATC messaging back and forth instead of tying up the frequency...

Sounds like you have a short somewhere. Did you physically check the wires and connector pins?

Sorry for the delay in responding if your still looking for a interconnection Board I can supply you with the board and all the DB37...

If you can live with it at least you will have an obstacle database. Ozrunways does not produce one, as far as I am aware at this stage...

CPDLC!! Controller-Pilot Data Link Connection - the ability to "text" ATC messaging back and forth instead of tying up the frequency...

OK... I think this is my issue. There seems to be a file from AVPLAN - but I have no idea what that is, or where it is. I don't use...

To enlarge upon and, for some, perhaps clarify the above: When tracking a VOR, the number in the course window matters. If the pilot...

Next time I'm at the bird I'll try and check what I see on my Dynon Skyview classic (same EMS) with the master bus off. I suspect the...

I have an error message on my Dynon HDX EXT Level Button stuck, I do not have an Autopilot, level button or anything connected to the...

Good questions, but probably better directed at Dynon than at the user forum.