Speed warning on D100

V

vikino

New Member
Joined
Nov 27, 2020
Messages
12
Hi all,
just a question, if someone can answer that. In my plane i dont have AoA pitot tube installed, but i want to enable warning on speed for ex.if speed is 40kts or less. I dont need AoA it self, just speed warn. Will it work when i connect pitot pressure to pitot and AoA port parallel together?
Thank you, Vitek
 
vikino said:
Hi all,
just a question, if someone can answer that. In my plane i dont have AoA pitot tube installed, but i want to enable warning on speed for ex.if speed is 40kts or less. I dont need AoA it self, just speed warn. Will it work when i connect pitot pressure to pitot and AoA port parallel together?
Thank you, Vitek
Click to expand...
No - why not add the AOA/Pitot head ? It doesn’t need to be heated if cost is a factor however the advantage of that is something I wouldn’t dismiss. There are other ways to have a low speed warning which may cost enough to consider not going that way anyway. YMMV.
 
jakej said:
No - why not add the AOA/Pitot head ? It doesn’t need to be heated if cost is a factor however the advantage of that is something I wouldn’t dismiss. There are other ways to have a low speed warning which may cost enough to consider not going that way anyway. YMMV.
Click to expand...
Because there is a problem to get another tube into wing, and there is only one, because static port is on fuselage...
Dynon can do that warning, just need to k ow if it will work when i connect pitot tube also to aoa port...
 
Hooking up pitot to AOA won't break anything, but also won't enable any speed-sensitive warning. The calibration won't work any different than if it weren't connected to anything at all (your current state).
 
You must log in or register to reply here.
Back
Top