Search results

Is the Skyview compatible with any "Stormscope" type lightning detector system? 8-)

Is there a maximum distance I can install the SV-XPNDR-261 from the network? I want to place the SV-XPNDR-261 in the rear of the airplane which would need the harness to be about 20 feet long. This way the transponder can be about 1-2 feet from the antenna. Is this even a good idea?   8-)

I have a TRIO autipilot with NAVAID servos and am thinking about going with a Dynon autopilot/servo system instead. Are Dynon servos dimensionally identical to the Navaid servo or will I have to use a different mount to use the Dynon servo? 8-)

Just curious to find out how many total DYNON EFIS units (D10A, D6, D100, D180, SKYVIEWS, etc.) have been sold worldwide? 8-)

Does anybody know if there will be a DYNON exhibit at the Houston Air Show this weekend?  8-)

Is there a way to display Storm Scope data on the Skyview? Not sure if this has been brought up before. 8-)

How about a clock to the D6 EFIS. Nothing fancy, just a basic digital clock with hour, minutes, seconds somewhere in the bottom corner of the display. Or the ability to display the clock from a connected GPS. Kind of like it already does with the GPS speed assist mode. 8-)

I am interested in installing a Skyview system in the future but for now I want to replace my old Attitude Indicator with a Dynon D6. The D6 will eventually be a backup to the Skyview. What would I need to purchase in order to maximize the D6's capabilities until I get the Skyview? 8-)

I installed a Dynon heated AOA Pitot tube and saw very small holes on the bottom of the tube. What are they for? Are they used with the ram air or the AOA part of the tube? What will happen if they clog/ice up?  8-)

Will there be a way to superimpose the HSI display on the main page instead of on a separate "window"? 8-)

Does the system have its own GPS receiver or does it need to interface with an external GPS? Will it come in the size of the D10A? 8-)

Even though I don't have a Dynon EFIS (yet) I bought a Dynon Pitot since someone broke mine while parked on the ground and I had to replace it. I am going to install it as a regular Pitot until I buy an EFIS. Do I have to seal/close off the AOA portion of the tube or do I just leave the AOA...

Do the Dynon EFIS or EMS have the capability to record/store hours and/or RPM's? In other words replace the standard "Hobbs" and Tach Time Meters.

I would like to see the capability to display dual VOR/GS's on the Dynon systems. Either putting both VOR/GS signals on one display or put each signal on a individual displays when linked together. I am looking into putting a DEK-180 and a D-100 linked together with a HS34. Being able to display...