Search results

I have a Garmin GNS 480. I believe this has a serial output and it is an IFR certified box. Will I be able to use this through the serial connection and have a full function HSI including glideslope/vertical navigation? It was my understanding the HS34 was required for the legacy units to output...

It would be my guess that when an ARINC converter is released for Skyview that it will be another small module which would communicate with the screens via the network connections through a splitter. Is development to the point where a release date is being considered? Will there be an...

In that vein, I think he is asking if we will be able to use the flight director without engaging the servos. In other words use the autopilot controls for desired heading/course/altitude/vertical path and have the flight director work even though the servos are not engaged. I understand this...

Thanks for the answer Support. It certainly looks like the sizes will be compatible to the legacy products and as such should be quite usable for instrument approach work. Can I turn off the FPM leaving just the attitude display? If so, will the center of the attitude display be a "pipper"...

I have seen several videos of the Skyview in motion from both Dynon and a couple of YouTubes. I have a few questions. What is the diameter of the HSI on the ten inch screen at full, half and three mode displays? What is the size of the HSI on the D-180/D-100? I feel confidant the HSI is usable...

I just read on the site that Dynon is saying to disable DSAB on legacy two screen systems due to a dual screen rebooting issue. The DSAB functionality is very important to me. Will the next firmware update solve this issue and allow DSAB to be enabled for IFR flight?

Does my Have Quick TOD have to match JakeJ's? now?

This dedication to customer support and producing the finest product possible at a reasonable price is the reason I will be outfitting my project with Dynon.

Dynon Support will chime in rapidly but the current version downloadable from Dynon contains all previous updates. If you update to the latest version you will have all the modifications and fixes in the previous versions and therefore only need to do one update. Just as a reminder, back up your...

Re: Can ground plane serve as remote compass mount Thanks for letting me know the transponder works OK from inside a plastic airplane jakej. All drag is bad but preventable drag has to be the worst!

Re: Can ground plane serve as remote compass mount What size is the ground plane? Was the antenna already on the plane when you got it (and therefor the reason it is out in the slipstream)?

Re: Can ground plane serve as remote compass mount Fair enough. A separate ground plane for the transponder seems the better way to go given your concerns. Now for the fun part... could I located it below by a couple of feet? What distance would you like to see?

The HS34 is definitely part of the plan. Is there a listing of radios that output over ARINC? I would assume a KX 170 does not but what about the KX 155/165 series? Any of the Narco or Terra stuff?

I know Garmin 530, 430, 480, SL 30 and SL 40 will all feed the HSI in the D180 and D100 from reading here. What other nav radios will do this?

Re: Can ground plane serve as remote compass mount Post removed, reset Mode 4 and execute RTF protocol.

I am building a Glasair and am planning to construct a "shelf" attached to the sides of the fuselage in the back to provide a mount point for the remote compass units of a D180 and D100. It occurred to me I might make the actual shelf out of aluminum and perhaps mount both the ELT and...

Hi Dave, I know Dynon Support will chime in with their response but let me add my two cents. I think your diagnosis has shown your D180 will switch to it's battery as planned when the main charging unit goes down and the battery has drained below the threshold it looks for. I know you can set a...

If it is not possible to offer a choice, count me among those who will not use Jepps.

Amazingly fast response. The Dynon Support folks are the primary reason my panel will have Dynon displays. Thanks!

Thanks for the information. Since it is supported, can I assume that once installed it is chosen from a configuration menu or does it not matter in that the output is the same two wires?