Search results

Trust me, from experience, anything is possible ;) Jake J

Jason Hope you don't mind me giving input here but did you have the servos powered up when you did the upgrade to v4.0 ? if not then maybe that's the problem ? From your post I think this isn't quite clear :D Jake J

I don't have the time to go into antenna design now however here is a useful link    http://www.wingsandwheels.com/antenna_vhf_airband_gps_mobile_e.htm     FWIW I sometimes make my own, for composite aircraft, using 2" wide x .020" aluminum strips secured in a cross section as a ground plane...

It can ;) Jake J

I have found that some of the earlier (mostly white colour with Dynon logo) 'sticks' have a problem in that the 'tongue' partly retracts into the body due to it coming unglued internally.  Squeezing the body (flat sides), between two fingers,  at the insert end while inserting prevents that from...

A hypothetical ? question-- If you lose a display ie 'lights out' on a single display set up, is there any way to get the settings etc out from the system ? Jake J

pm me, I may be able to help. Jake J

Will this be suitable for you ? ;) -- http://www.bandc.biz/anlcurrentlimiterbase-1.aspx Jake J

BTW Russ - the basement is not a good place to radiate signals ;) Jake J

Mike The red wire has to be connected for it to work & pulses are 68000 as the starting point for the red cube. :) Jake J

Geoff You'll need to check all of those connections, especially the crimps - the shunt itself is 'solid' so from my experience it's always the connections that cause this problem ;) HTH Jake J

Bill B&C have an ANL fuse mount & cover, it's a Blue Seas unit - looks good too ;) Jake j

Paul .5 or .25 watt is ok, not important. As to the colours - with my eyesight I generally confirm with a DMM, just to be sure that it is serviceable as well :) Jake J

This is serious stuff!! - Really ??? If it's not a safety of flight issue then it becomes another 'nice to have feature' IMO ;) Jake J

Just a thought :D -- do you have a glideslope antenna or Diplexor fitted ? Jake J

mmarien You have a pm :) Jake J

Bryan page 4-13 of the install manual is worth reading, see here   -  http://www.dynonavionics.com/downloads/Install_Guides/SkyView_System_Installation_Guide-Rev_K_Software_v3.3.pdf HTH  :) Jake J

Maybe this is useful ? http://wiki.dynonavionics.com/Generic_ARINC-429_Wiring & other info from DS -- "Note that you can only have one device send data to the 430 at once. So if that's your Honeywell EFIS, with the 430's IN set to HONEYWELL EFIS, there's no way to also connect the HS34 to...

The Flowscan unit or the EI (red cube) type, which is what Dynon sell anyway, just need to set the K factor for each type. Jake J

vonbaron page 2-2 (vers 5.4) shows it as Gps (serial) IN on pin 22 - do not connect this directly to Dsab. HTH Jake j