Search results

Sorry,  I confused the issue.  I have the appropriate EMS Skyview wire harness purchased from Dynon.  It is not the same EMS-D10 Wire harness. What I was trying to convene - my setup wth the 30kohm resistors, connected to the ignition switch (per figure 25, p 6-27) is the same setup I had for...

I have been in/out of the country for the last three months.  I was able to start my engine for the first time today (annual is about complete).  I have a LIO-360. I have my RPM wires hooked up to pins 32/33 (White/Green, White/ Blue).  They are hooked up to the ignition switch through the...

Tom, Duh!!  Thanks for the info.  The settings were not the same.  Sooooo nice to see the data pop up on both HSIs. Again - thanks  Tim

Tom, I will make sure that both screens are set up the same. Nice to know it works!! Thanks, will report back. Tim

Tom, You are correct.  The GNS-430 is only transmitting over the serial ports, they are not receiving serial data. To be clear - on the serial port setup up screen, it shows the GNS-430 sending data to the two SVs.  This can be accomplished by the Approach Stack System. So, I will ensure the...

I currently have two Skyviews (version 2.5), each one has the Dynon GPS puck for position.  I also have a GNS-430 hooked up to both via the Approach Stack system.  Each SV “sees” data the same way.  I can tell in the serial setup menu TX and RX are working. One of the SVs reads the GNS-430 data...

Thanks for the quick reply - thought I missed something. Tim

OK, I will ask......what is the status of the June release? Did I miss an announcement that it was delayed until X?  Thanks  Tim

Folks, I just spoke to Tim at Approach Stack.  He will build me a harness that will connect to the hub (a unit that passes all data via DB connectors) allowing me to receive the correct GNS-430 serial data between both SVs.   Tim will also create the harness for the future "AIRINC box," once...

Tom, Yup, that is what I was reading.  I was a little confused with the servo install kit.  Way too many DB9 connectors. Now all I need to do is update my servo software :-(  I sold my D10 a while back, and will need to borrow it to update them.   Thanks again!!  Tim

Tom, OK, you are on a roll!! One more - it appears from the wiring diagram, I can splice the (2 separate servos) servo wires (White/Blue, White/Green, Blue, Green) into the existing Skyview Network (One running between the two SkyViews). Make sense?  Tim

Tom, Thanks for the quick reply. I suspected I would need to directly attach the GNS-430 to both SVs. I will contact Approach Stacks to see if they can make a harness the taps into the data. Autopilot question? It appears from the wiring diagram that the servos are part of the network. Can...

Just got back from a lengthy trip.  I was able to very quickly update my SVs version 2.0 - awesome job!! I have two Skyviews, EMS, ADAHRS and I am using the Approach Stack system.  I have the same Dynon GPS hooked up to both systems, both show position - no problem. My question - will the...

Why yes, this is what I am looking for. Thanks Tim

I realize that the new software release is not scheduled for another week and a half.  However, if possible, since this is probably the most significant one (Autopilot/HSI) it would be nice to get some preliminary comments from the Beta Testers. Because I am a guy, pictures of the new HSI set...

I just got back from the airport and loaded the new software.  All  can say is  - WOW!!  I am thrilled with it.  Will post pictures on the below website. Now, back to work on the remaining releases!!  I am really looking forward to scheduled releases (autopilot/HSI). I am anxious to fly with...

Guys, Thanks for the quick response - looks great!! I also noticed in the software release that there is a fix to the GNS-430 location issue..makes me very happy.  I ws not able to get my proper location after checking and rechecking the system.  Hope this solves the problem. Again - thanks  Tim

Dynon, Could you give us a shot of the new map upgrade?  It will be a while before I get to load the update. Thanks  Tim

Dynon, Please forgive the silly question.  The software Skyview releases currently scheduled for 30 March (tomorrow) for the map program - is this the $500 release, or is it just an add on to the existing program? March 30, 2010: Display synchronization, GPS assist (Updated, was February 28...

Dear Dynon, I am a huge fan!!  I just ordered my second Skyview for my Velocity.   I have been waiting for a company to develop an innovative product (at affordable prices) like this before I start the IFR rating process.  I will fly IFR for pleasure, and for increased safety. While...