Search results

Hello Dynon support,  :(  Well, I tried the 100K resistors (as you suggested) and still have the spike problem, so I'll be trying 150K this weekend.  I know the manual says that 150k is max. but I assume that I can keep increasing until I loose the signal.   I would guess that you are using...

Thanks, I'll try that this weekend. Any chance of having data storage/download capability from the D100 like you have from the D120? :)Bill

During first flight I got an alarm for over speed (lycoming O320 +Sensenich prop max RPM 2600).  When looking at display it was reading in the 2300 RPM range.  Did data dump after landing and plotted RPM.  There are many very short duration spikes in rpm which I know are not real.  Has anyone...

I looked for past posts on this topic but couldn't find anything.     It would be real nice to have the capability to count in one direction for a period of time and then count in the other direction for another period of time for fuel management.  Say you start with 30 min on tank "A" then...

I read somewhere that you can tie the audio outputs from both the D100 and D120 together before the variable resistor to use a single input of the intercom.  Is there a need to add a resistor in each line before the tie point in order to provide isolation between the two units?

Dynon support,  Any idea as to when there will a released version of user manuals for the 3.0.0 software upgrade? Thanks

Thanks, You are correct I didn't connect the serial ports together. I think I'll just wait, that way I don't have to disconnect each time there is a software upgrade. Bill

Dynos support,   I recently installed the D100 and D120 combo and have started configuring screens.  The D100 see the D120 no problem but the D120 does not see the D100.  I had to reinstall the D100 update (Rev. 1.08) to get remote compass input but did not update D120 (Rev. 1.07).  Do I need...

:o OUTSTANDING! You guys are great!!!

;DI see from the announcement that you are now offeringdata logging. "Data Logging – the EMS can now log data internally for later retrieval and analysis".  Will this be standard with all newly shipped units or will there be an additional upgrade cost.  Will  this ability be a retrofit to...

:-? There MUST be someone left at Dynon HQ that can fill the rest us in on the new stuff being shown at SnF isn't there?????

Dynon,   Took a quick look through the past listings and I see what you mean about things/hints already being out there.  I should have done this first.   I didn't eventhing about the industrial spying aspect. Thanks for the reply. Have a D100 and D120 on order with headstart components...

Good Morning Dynon Support,   Can you give us a short rundown on what projects/upgrades both hardware and software are currently being worked on and a rough time table for their release??

Dynon,  Thanks for the speedy reply to part of my question.  But, are there any plans on making the brighter display standard equipment? Bill

With 2006 quickly coming to an end what if any changes to the pricing structure is Dynon expecting?  In general, are we going to see any increase/decreases?  Will the 800 nit displays become the standard and at what price? Any new products expected in 2007?  etc.?  Should I buy now or can I wait...

OK, I give up.   I just can't see to find the color coding of wires furnished with the EFIS wiring harness.  The install manual shows function vs pin-out but not color of wires.  The installation manual for the D120 EMS includes wire colors.  Where do I find wire color map for D100 EFIS???  :-/...