Search results

  1. C

    Skyview / GNS 430W question

    Sure enough. Changing GAMA 429 to GAMA GRAPHICS 429 did the trick. Holds and other curved flight plans are now displayed. Duh.
  2. C

    Skyview / GNS 430W question

    I had understood curved flight paths from the GNS-430W were not yet supported in Skyview (as contrasted with the GTN units). Has this changed? (Or was my understanding incorrect?) I've also never seen holds on the Skyview. Add link to other posting...
  3. C

    Auto Chart Updates

    I see Bill's point. Now it advises us the database is outdated. Why not also check to see if the update is present, and if so, notify and ask if we want to load the new database.
  4. C

    Remote AOA Display.

    +1
  5. C

    Geo Referenced taxi diagrams

    +1 (If at an airport with a diagram available and less than x knots, auto switch to the diagram).
  6. C

    Traffic Voice Prompt Enhancement

    +1 -- Nice suggestion. Perhaps the additional voice information could be an option (for those wanting to avoid too much chatter in areas of much traffic).
  7. C

    Problem with Van's RV10 and Dynon AP (Skyview)

    What problems is he referring to? AP works fine in my RV-10.
  8. C

    What is default squelch setting of SV-COM-C25?

    Steve, Do you have electronic ignition, by chance? What kind of noise are you having? Loose spark-plug wires?
  9. C

    adsb traffic

    I saw this phenomenon in Wichita last week on one target. Didn't think twice about it.
  10. C

    Probable fix for AP disconnects, cautions, red-x

    Looks like my ARINC was the culprit and for some reason it was preventing the loader from being able to update the modules. That's going back to Dynon. In the meantime, I'm VFR only and I hope when the ARINC is fixed/replaced, I'll be fully back in business.
  11. C

    Probable fix for AP disconnects, cautions, red-x

    I'm having a similar network issue. Screens all on 14.0.7 but can't update any modules (AP, com, knobs, EMS, etc) (and ARINC not detected at all.) screens can't seem to load firmware to the separate modules. "Loader failed." I'm grounded until I get help. Everything worked previously on 14.0.0.
  12. C

    Altimeter/transponder recertification procedure

    +1
  13. C

    Trying to revert to 13.0.3

    I reverted to 13 using a Win 10 machine and had no issues. May need to manually select the proper USB drive if the auto selection was not correct.
  14. C

    I am SO sick of the SA app

    I, for one, would recommend not changing the "try later" message unless the file download will automatically be attempted again immediately. I have had good success using the download manager and when I get that message, it is no trouble to...try again. HOWEVER, while it may make sense for many...
  15. C

    Fuel Range Ring

    The always-changing issue is no big deal. Dynon already handles that problem for the top-of-climb indicator (blue arc) nicely. Ditto for fuel quantity and probably many other similar data. Just smooth it a bit over a short period of time. And I want it to change. Add power and see the impact to...
  16. C

    Fuel Range Ring

    I think it would be nice to have a wind-adjusted fuel-range ring on the map (similar to the new glide ring). I believe all the data is there. Just need to do calculations and draw it. Maybe two rings, one for specified fuel reserves and one where you run dry.
  17. C

    Pitot Static Check Maintenace Mode

    +1
  18. C

    Showing traffic on approach plates

    +1
  19. C

    V14 glide ring

    I'll put another request in for displaying best glide on the airspeed tape like Vy and Vx are presently. (Like other EFISes do.). During a stressful engine out time, it'd be nice not to have to remember what your book best glide speed is.
  20. C

    Dynon Spring Fly-in Season Product Announcements

    +1
Top