Search results

Any progress on Excel generated checklist for Mac OS. I have the latest version from the Dynon website but still get run time error when attempting to save.

Silly question but....is the Skyview 10 Software release only for the new touch screen version of Skyview or should all current users (Non touch 10" AND 7" screen users) install it?

Thanks, all worked fine once the correct pins (22 and 31 in my case) were allocated. ge

Group Can someone provide step by step instructions for installing capacitance type fuel senders (instead of the resistive type). I've tried to follow the (very brief) instructions in the Installation Manual but can't find the capacitance Widgets after deleting the so called resistive Widgets...

You are right. There were good sentences but the configuration was incorrect (I had "none" instead of "Position 1" in the port setup menu). This is despite checking 52.3 times!!! The interference on the screen however remains. I will contact you via Dynon Support with additional pictures...

Help - I think I have a faulty Display. My system has 2 Skyview SV-D700 displays (left and right) The left display works perfectly well in both positions (left and right). The right display appears as shown in the attachment in both positions (left and right). During boot up of the right screen...

Thanks for info. I think I have the update problem described on your website When both displays are powered up together, both screens show the red cross in the top bar transponder area. When display 2 is powered up alone the transponder appears in the top bar BUT if display 1 is then powered up...

Jamie Thanks for that You are right on one issue. Despite checking the port configuration over and over again, I still had serial port 2 connected to a Garmin SL 30 on display no. 2 (really don't know how that happened). The configurations on both displays are now correct (Transponder on...

Help ! Have just updated to version 3.1.1 and immediately have problems. System is Skyview with two screens, Dynon GPS and Dynon Transponder Neither screen will detect the GPS or Transponder when configuring the network. Now hear's the strange bit:- Screen 1 says the transponder is on serial...

No - not upgrading. I've just bought the Skyview system and was wondering if the AP74 could be used as a complimentary unit. It just seems that the Skyview controls so many "systems" that a lot of time could be spent scrolling thru menus and twisting knobs!! A separate (and simple) control for...

Can the AP 74 unit be used with Skyview? The answer is not obvious from the Dynon web site or forum!!

Thanks Guys - problem solved!! Uninstalling the virus software (AVG 8.5 ) did not help - still got the yellow screen with the message 'unable to connect'. Soooo.. decided (as suggested on the forum) to check the continuity of the black, yellow and orange wires (Dynon 25 pin plug to DB9 Serial...

Thanks for the replies Have tried another connector cable with same results. Yes, the screen does turn yellow but only when attempting to 'detect firmware version' and not when attempting to 'download logged data' Everything seems to return to normal when unit switched off at avionics switch (it...

When attempting to update the Dynon 180 to Version 5.1.1. I get the following measages: Instrument found on Com port 8 Attempting connection It then cycle through a number of different Com ports only to give a final measage that it is unable to connect. Any ideas? The Dynon screen does go...

The installation manual for the D180 states "thermocouple wires can be cut to a desired length if your application requires". I understand that the brown wires coming from the 25 pin plug can be cut to the desired length BUT:  is it also OK to cut the steel covered wires coming from the CHT and...