Search results

  1. R

    VNAV indication questions

    Having an issue with V-Nav. I tried it today at several airports and the autopilot fly's the plane too low. I tried setting the VS required numbers to 0 NM from threshold 50' above and 3.5 deg slope. Any one else have this issue.
  2. R

    Skyview seeing itself as traffic.

    Updated transponder software and flew today, all is good. Thanks
  3. R

    Skyview seeing itself as traffic.

    I have the Same issue. Firmware 14.0.7.3621 Skyview system W ADSB, Dynon Transponder, GPS 250, Based KPAE,
  4. R

    PFD Terrain Brightness on 13.0.3

    After upgrading I have the same issue.
  5. R

    I am SO sick of the SA app

    I have the same issue. I have been playing the email game with them and also calling them on the phone. They never said the they had an issue. after spending hours deleting all files on computer reloading their program and then updating I still have the same problem. (Update balls stay yellow)...
  6. R

    Data Log

    I just downloaded my SkyView User Data Log. The CHT's and EGT's are recorded in Centigrade not Fahrenheit. My SkyView displays temps in Fahrenheit. Also missing Volts and Amps. All software is up to date.
  7. R

    Highway In The Sky

      Just wondering if Dynon was planning on adding HITS (Highway In The Sky) and if there has been requests for it? Any comments from people using it on other EFIS systems?
  8. R

    New Installation question

    Here you go. Skyview 10" with a D6. I installed the following by the elevator bell crank. SV-NET HUB. SV-XPNDR. SV-ADSB. ELT. The SV-HUB has one connection going up to the Skyview, One goes to the elevator autopilot servo, one to the aileron autopilot servo and the last one to the AHARS...
  9. R

    New Installation question

    Sounds like you are planning the same set up I just installed in the 8 that I'm building. Skyview 10" , EMS behind the panel, AHARS installed in AFT Fuselage. FWD of that near the elevator bell crank is the Remote Transponder, ADSB Box and SV-Network Hub.  I would definitely run you're wires for...
  10. R

    Skyview with VPX Sport Amp issue

      Thanks for the reply, I will install a hall effect sensor, ordered it today. Also wanted to add that I just powered up the Skyview W/ VPX  and it all works great. I was amazed that the GPS and the ADSB both had reception on the ground in my garage with the door closed.  
  11. R

    Skyview with VPX Sport Amp issue

      Is it possible to use the AMP reading from the VPX and display it on the EMS page? (not use shunt at all) If so how do you get it to show? Evey thing else works great.
  12. R

    Dynon Comm Radio

    Any new information out on the new Comm radio? Shipping?
Top