Search results

Jake j - I fly a 1995 RV6 with ~1900 hours on the airframe.   So the reason I jumped in was i think i bring new info to the topic.  In my case i have 89 hours on system, and 15 hours since upgrade - a stable system in other words.  I have a Dynon 10 and a 7 installed and the 10 had some kind...

Gosh,  having read some of these posts, I thought myself fortunate... Guess what!?!?  Between 98 and 99 flight hours (15 hours or more since upgrade to latest software) since install of new panel, I see this as well.  The cute little audio lady starts clammering about cht and other warnings as I...

I did not understand your first paragraph reference to first engage vs any subsequent engage. Is there a behavior difference between the intial vs subsequent press of the disconnect? My experience is that if Sync Buttons are set to Sync, the AP disconnect will sync hdg / alt irrespective of...

Should we start a advanced autopilot wish list? Here are some non-obvious features that would be helpful. - configurable and easily selectable roll/pitch sensitivities for enroute and approach. -easily selectable straight and level vs last hdg/alt button. Yes - this can be configured but is...

Flying an RV6, I have set roll sensitivity rather low for enroute and find that when slowing for an approach, it needs to be adjusted to a higher value. Has any consideration been given to making an enroute and a approach configuration sensitivity settings easily available via a smart key? Thanks

Happens to me on startup as the starter runs.

Ken suggests in his message that terminal strips can be used which can make sense for certain installations so as to minimize wire bundles running from the aft to the panel. Are there any limitations to how many devices may be connected to a terminal block?  Is splitting neccessary ie only 2...

I have read that strong magnetic sources (such as battery or servos) should not be near ADAHRS' but have not heard much about ferrics and proximity. I have an RV6 that I placed the ADAHRS' in the tail about 1.5 feet behind the pitch servo install area and noticed that the steel cable for...