Search results

Looking to buy a classic D700 display for an existing single display panel. I will fly to your location in the US (within reason) personally pick up the display and pay cash once I confirm the display is in working condition. Will not pay via INTERNET and wait for one to be "shipped" to me. :cool:

This symbol started showing up on my SkyView Map page and I can't find what it means. 🤔 I hope it doesn't mean I have been cleared to land on Saturn. 🙃

Today while flying my pilot side screen failed. I did a hard re-boot and it came back up. About 5minutes later it failed again. Another re-boot brought it back and about 5 min later it failed again. I took a photo of the failure to see if anyone can tell me what could be the problem. The...

Is there any way to move the airspeed and altitude "tapes" towards the edges on the display? They block a good portion of the screen area and with a crosswind makes it hard to see some of the information. You can see this on the photo I took while flying where the airspeed tape completely blocks...

My #1 SkyView Classic display intermittently shows the battery backup is discharged and needs charging. My #2 SkyView display works just fine. I swapped the batteries and the #1 display still intermittently gives me backup battery needs charging while the #2 display works normal. The battery is...

Can anyone tell me what the message “ADS-B NO RADAR means? I am seeing this on a Dynon Skyview HDX, in the lower right hand corner of the map. FWIW this was asked on another forum but I thought this forum was more appropriate.

Has Dynon considered offering the AutoPilot and Knob Control panels so they fit in a standard 3 1/4" round hole? Maybe even offer the Com radio control head so it can fit in the 6.25" standard avionics rack. 🤔

Has anybody connected a Trio ProPilot to SkyView via the ARINC-429 module? If so, was their any configuration issues and what capabilities did it give you? 🤔

Now that ADS-B is required in many US airspaces, the FAA has provided a method to request entry to "rule" airspace under specific situations. FAA ADAPT Tutorial Video :cool:

With the upcoming ICAO codes being mandatory for filing a flight plan, I was wondering what the correct codes we should use. I know if we have the correct DYNON transponder connected to an approved position source the main code is E but with the SV-ADSB-472 should it be EB1 or EB2? Me thinks it...

When the D120 is set up for a ROTAX engine, only HOBBS time is displayed. Is there a way to also display TACH time without having to go into the SETUP section of the D120 every time I want to check it? I record TACH time for maintenance purposes. :-?

How often should the SykView Magnetic Compass be checked for accuracy? FAA AC 43-215 states: "Owners/operators should swing an aircraft (1) at periodic intervals as recommended by the manufacturer, ..." but I can't find any recommended timeframe in the SkyView documentation. :-/

How about a control head or adapter so we can install a DYNON radio in a standard 1.35" x 6.3" instrument panel cut out. Would make it easier for those of us that have a standard panel. 8-)

How about offering printed versions of SkyView documentation for purchase. It could be done via an authorized seller for those of us that can't print a 500+ page document. Printing many copies at once reduces individual cost per copy. 8-)

We were doing a practice ILS approach at KSGJ and both SkyView CDI's (G430W) were indicating a backcourse instead of a regular course. At the same time my 2nd ILS (VAL429, not connected to the SkyView displays) was indicating correctly. Both were displaying a correct glideslope. Is there a...

Has anybody connected a Val INS-429 unit to the SkyView using a serial port? If so, what configuration did you use on the SkyView port and the VAL INS-429 unit? I want to set the VAL INS-429 output information to be displayed on the HSI as #2. 8-)

I read there is a new Pitot/Static check procedure for SkyView that eliminates the need to power SkyView on and off as before. Where is the procedure located? I can't find it in the SkyView Install manual. :-?

I have a Garmin 430W connected to my SkyView ARINC429 input as well as my Serial port #4 and I want it to be my GPS1 source. When I go to the SERIAL PORT SETUP it gives me two options for the G430W, GPS1 - ARINC-429 1 / INPUT 1 as well as GPS2 – SERIAL PORT #4. If I select GPS1 - ARINC-429 1 /...

When you scroll the cursor to an airport on the SkyView map page, airport information pops up. It would be great to have runway directions and length also show on the pop up. If the airport has more than one runway, then show information for the longest runway with some kind of marker (asterisk)...

Helping a friend with his ICAO equipment list brought up a good question. Does the Trig TT22/Dynon Transponder have the enhanced surveillance capability when connected to the SkyView system and an ADS-B approved GPS position source? I know it has the extended squitter but can't find anything...