Search results

I guess the next question would be ( using your diagram and accepting it’s a Dynon 2 place intercom not a PM1000 ) if I’m happy tying all “crew” to same audio output ( ie copilot and both back passengers all hear same audio - can I just output all the crew audios on the same audio output on...

Thanks so much for that. I’m not planning on allowing the back passengers to transmit out. Just for talking between them and the other crew.

Thanks for that. I’ve just had a look at the PMA4000. The issues I see are that the 4000 is double the price here in Australia. $1000Aus vs $2000Aus. I’d be paying for stuff I’m never going to use. The 4000 has nav com 1 and 2. I have never had and never used a nav com device. In Oz the...

I’m in the process of building a Jabiru 430 needing 4 place intercom to go with my dual dynon radios. Although I’d prefer all Dynon to go with all the other instruments I’ve got to go with a non-dynon dedicated 4 place - planning on a PM1000 II anyone got a circuit diagram for a working set up...

Ok. Should be contactable anytime. 0419536668

Both experimental.

Expert. Well tried both but I use it in expert mode all the time anyway.

I’ve recently replaced my Dynon SV1100 in my Jabiru. It was a simple swap in a fully functional setup. The old SV1100 has some minor issues that require it being sent back to the factory. I had access to a new SV 1100 still in the box. So all the modules, battery and attachments etc are all...

My glide speed, sink rate etc is/was configured. Just not the NRST related filter.

Yep. Fair enough statement.

Have to admit - no. Had a look at the manual about the glide feature and it doesn’t say anything about filtering in that section. Maybe there’s filter in the NRST section. But that’s defeats the purpose of the feature if you have to have complex other, never used, parameters set up prior to...

Tried this feature out today and immediately ran into a problem of the autopilot selecting wrong airport and I can’t work out ( nor can I find any instructions) on telling it to drop the selected airport and go to the next nearest. I’m in a wheeled fixed wing and the emergency glide keeps...

Just to keep all up to date. I borrowed another HDX screen and the problem reappeared in that one. So I’m working on the principle it’s a problem with something else - one of the modules or a cable. Tried swapping or replacing cables, tried sequentially without single modules. Various...

I’ve got multiple issues that have arisen with my Skyview HDX (about 5 years old). Intermittent faults - screens (left half of screen - EFIS Display and Engine systems bar across bottom ) go black with red crosses and says ADAHRS Fail and EMS Fail. Also “Touch Screen Error” used to occur...

Thanks for the complete lack of help from the above. ( except for Marc J zeitlin who gave the useful information that it is a Thermister - which I have not been able to find or confirm in previous extensive searches because the specs and data information about the actual make up of the SV OAT...

I have no data sheet or instructions on the probe and when I’ve done searches on it and can’t get anything. It’s just one I had in my spares box. But when you map the sensors and tell it the pin mapping is for a temp probe the only options you get in the menu list that appears is for either J or...

I’ve got a Jabiru 6 cylinder engine all set up and apparently working in my skyview HDX Ive got a spare Dynon OAT type probe (with two wires -one white, one black and white. ) Tried to install it as a cabin temp probe connected up to pins on the 37 pin input. I selected a ground and (I...

update on the above. i went back onto the skyview and removed all the files on usb stick. redownloaded the files from the dynon site and reinstalled. this time the graphical display of EGT and CHTs is back. The described red crosses still appears instantaneously and then reverts to yellow boxes...

I updated my Jabiru with the newest Dynon HDX update and it seemed to load properly. But now I have no temp sensor inputs ( either CHT or EGTs). When it boots up there is an instantaneous display that shows red crosses on each of the numeric blocks where each temp should be displayed. Then the...

I am planning an upgrade in my Jabiru 430. I have a functioning Skyview HDX with knob and AP panel. Looking to add skyview radios. Issues are: I need four place intercom I need dual radios Need advice as to what set ups users may have that will fit this need. My reading seems to indicate...