TouchTheSky
I love flying!
- Joined
- Jun 16, 2018
- Messages
- 43
Can someone point me to the upgrade plate that is required to retrofit 10" Classic with an HDX? I remember that I have seen it before ...
There's not a plate required, but there is one available.Can someone point me to the upgrade plate that is required to retrofit 10" Classic with an HDX? I remember that I have seen it before ...
Took less than 2 hrs for me to make the physical changes. Took some time for me to get custom guages to display as I wanted in the EMS for example I have a second amp sensor for my backup alternator on the vacuum pad. This did not transfer over from the classic display also I had to retune the autopilot settingsAlright, so not 100% plug-and-play then - new set of button holes/nutplates required. Probably a good idea to ask my local Dynon representative ...