D180 and d100

[tbbaily]

My d100 will not display ems data from the d180. The d100 says ems data not available
Any ideas

 

[Rhino]

Which one is set as Bus Master? They can't both be set that way.

 

[tbbaily]

The 180 is the master. I run flight instruments on it and engine instrument's on the f100 but everything works on the 100 except engine instruments
I don’t know if the 180 isnt sending the data or if the 100 isn’t seeing it

 

[Rhino]

I meant in the DSAB network setup. If they're both set to Master, it won't work.

 

[tbbaily]

I meant in the DSAB network setup. If they're both set to Master, it won't work.

The 180 is setup as the master on the dsab netwtk. It’s worked for 8 years and just lately hasn’t worked. I don’t if the 100 orc180 is bad

 

[dj-tentacle]

Check the dsab lines between the two.