My d100 will not display ems data from the d180. The d100 says ems data not available Any ideas
T tbbaily New Member Joined Oct 9, 2009 Messages 8 Yesterday at 5:09 AM #1 My d100 will not display ems data from the d180. The d100 says ems data not available Any ideas
Rhino Well-Known Member Joined Jul 20, 2009 Messages 1,737 Yesterday at 9:57 AM #2 Which one is set as Bus Master? They can't both be set that way.
T tbbaily New Member Joined Oct 9, 2009 Messages 8 Today at 3:52 AM #3 The 180 is the master. I run flight instruments on it and engine instrument's on the f100 but everything works on the 100 except engine instruments I don’t know if the 180 isnt sending the data or if the 100 isn’t seeing it
The 180 is the master. I run flight instruments on it and engine instrument's on the f100 but everything works on the 100 except engine instruments I don’t know if the 180 isnt sending the data or if the 100 isn’t seeing it
Rhino Well-Known Member Joined Jul 20, 2009 Messages 1,737 Today at 10:15 AM #4 I meant in the DSAB network setup. If they're both set to Master, it won't work.
