Search results

  1. C

    HDX trade up

    There are three equivilent USB ports on the HDX. One that is attached to the D37 Harness, and two others that are just just mounted in back of the HDX panel. You can attach an extension cord to any of the three. https://a.co/d/1z4CiZX
  2. C

    TRIG TX56A

    I got a reply from a tech at Trig in Scotland... Hi Charles, The TX56 is fully compatible other than the volume control. The software update will help with the following: Improved interoperability with Dynon Skyview and Skyview HDX systems when using SL30 protocol. The HSI course is...
  3. C

    TRIG TX56A

    Has anyone integrated this unit with Skyview as yet ?
  4. C

    TRIG TX56A

    Yes, there's a thread on that implies that Trig is working on a software upgrade to make ut completely compatible with Skyview.
  5. C

    TRIG TX56A

    Does this unit use the SL30 protocol, Can it interface with the Skyview HDX using the SL30 protocol or the ARINC-429 ?, i.e. without a dedicated CDI? The installation manual includes this paragraph: 5.6.11 RS232 Input/Output The RS232 input allows certain third-party multi-function displays...
  6. C

    Engine, EGT and CHT Sensor compatibility with SV-EMS-220 variants

    I had one of the Dynon probes fail in the last plane I had them installed in. It started to read 60-70F high.
  7. C

    Engine, EGT and CHT Sensor compatibility with SV-EMS-220 variants

    Thanks for including (explaining), what the difference is between the two kits. That makes sense. Am I correct that this FI system injects the fuel into a common intake manifold, and not into each cylinder independently ? And yes, considering what I'm going to be spending on the complete Skyview...
  8. C

    Engine, EGT and CHT Sensor compatibility with SV-EMS-220 variants

    I have just purchased an new aircraft with a Lycoming O-360-A1A. I want to install a complete Skyview HDX with the EMS-220 Engine Monitoring System, (EMS), but the installation kts and wiring harnesses for this come in different variants depending on engine and type of carburation/fuel...
  9. C

    Dynon Skyview HDX - For Sale

    Please shoot me a private message at cbretana@areteind.com. I am interested in any of the Dynon components you might take out of your bonanza, including HDX, EMS, Autopilot servos, Com/ICS, transponder, ADS-B in/out, etc.
  10. C

    Dimmer no working

    .. The fact that you mention that "... the two wires ...", makes me suspect that this may be wired incorrectly. I mad ethe same mistake when I installed my own dimmer rheostat. It needs to have three wires attached to it. I f you only have two wires, one from a 12 volt power source and the other...
  11. C

    Tie Flight Plan SRC to HSI NAV SRC

    I will check that. I confess that I did not put in a complete flight plan with 2 waypoints, I just entered a Direct To a destination airport, and activated it. It did show in the flight plan menu on the HDX scren, (as a separate tab labeled GPS 175 ). I will check again, and get a screen shot.
  12. C

    Tie Flight Plan SRC to HSI NAV SRC

    Tried this again yesterday. Entered a simple flight plan on GPS 175, Then went to flight plan menu. The flight plan was shown there, and I could select it, but there was no navigate option on soft keys.
  13. C

    Dynon Skyview HDX - For Sale

    Golly, Rhino, you're right. I should've thought of that! Thanks! On the other hand, here's a short multiple choice quiz: A. I have a rear cockpit. B. The one I have is broken? C. I have another plane. D. I want to put one on my Harley. Answer can be found in the next installment.
  14. C

    Dynon Skyview HDX - For Sale

    Yes, I am interested in the HDX. email me at cbretana@gmail.com.
  15. C

    Tie Flight Plan SRC to HSI NAV SRC

    Neither if those references clearly state which Nav sources this option works with. Using the phrases INPUT 1 & INPUT 2 confuses the issue because it can be read to mean that only Nav sources feeding data thriugh the same ARINC-429 will be affected by this setting, i.e., that switching the...
  16. C

    RPM showing about double the actual number

    Had exactly the same issue with my O-320 when I first installed p-Mags. They provide spark plug pulse at top of power stroke and at top of exhaust stroke, so you get two pulses every revolution, instead of only one. The extra spark plug pulse at the top of the exhaust stroke apparently doesn't...
  17. C

    Tie Flight Plan SRC to HSI NAV SRC

    I also was confused by this. I set it to "Yes", but was surprised when I went to Flight plan menu and could not switch the Nav source from the external GPS navigator, (I have a Garmin GPS 175), to the Dynon Skyview GPS. When I switched the CDI source back and forth, the Flight Plan Source...
  18. C

    Need advice about adding radios to HDX

    Too bad there's not a wire on the Skyview harness thst you could hook up to a rheostat mounted in your panel that would remotely control volume on the selected radio, without a control head, like you can with Skyview display brightness.
  19. C

    Third party IFR Navigators and Skyview Configuration Settings

    Your question makes me wonder if I am misinterpreting some other behavioral aspect of this. I have asked Don Jones at Dynon in another thread...
  20. C

    Garmin GPS 175 to HDX Skyview -ALLOW AUTO SWITCH

    Don, will it also change the CDI nav source to an ILS Localizer signal from an ILS receiver on a serial port, if it uses the SL30 protocol, (like an SL30, or a VAL NAV 2000)? Or does it only work with ILS signals in the same box as the GPS, on the same ARINC-429?
Top