Search results

Now if I could find a serial connection!! Can I assume that I would be able to use a RX connection if the TX for that serial port is already used for another device? specifically, I believe that I can have a separate device attached to RX as long as it is the same Baud rate as the TX. Is that...

Starting a dedicated topic for this hot addition: Another ADSB receiver announced today...I'll copy part of Dynon's release below: ...This remotely mounted receiver module integrates with the SkyView system to provide easy access to weather and traffic information on top of the detailed...

I have the same boot up as Russ and I only set the fuel quantity and accept on the one screen (Master) the other screen never asks me for the fuel information after booting up and a fill-up. I think I had this issue once when I did not "accept" the added fuel on one screen.

Excellent! Thank you for the response!

Mentioned under #122 "1) Autopilot performance enhancements. We continue to be committed to fielding the best autopilot possible".- what will we see in improvements to the autopilot in 3.4? Thx

Been a while but I went to (SETUP MENU > HARDWARE CALIBRATION > EMS CALIBRATION). than I followed the instructions to calibrate the fuel level for each side. Seemed like a easy process. marked empty. than added 2 gallons at a time and pressed a button. Did that all the way up to 24, which is the...

I know this was brought up before but as we near a near future release, is Dynon putting out a hardware solution for Weather?  or simply a way to view weather on the display via 3rd party (Navworx)? How would it interconnect with the System? Skynet or a need for a serial port? ( I realize this...

AOPA Flight planner .gpx export or the Dynon export utility? I'll assume the export utility, but just making sure! thx

I meant you could create the checkpoints right in AOPA. I decided that I would give this a try so I went to Google Earth got the Lat/Long of where I want to be (exactly) and put that info into a .CSV that dynon posted in another thread. I have imported that user point to my Dynon and added it to...

why not use AOPA flight planner?. Easy to export to .gpx

What is the response to a failure? When does it occur? boot-up? First thought is from post #122 2) Improved SkyView Network Redundancy, with detection and annunciation of wiring or electrical problems, and in-flight failover to a backup network (that you've already wired if you have a SkyView...

There is another place for research- figure out why the screen causes the noise at boot-up, I tried everything here as well, filters etc.. I, at one point, thought the noise at boot-up was related to the EMS spikes when the PTT is depressed, aka a EMI or RFI related. I also had headset issues...

We have a likely fix for the "EGT spikes" issue in an updated SV-EMS-220. Unfortunately, that updated version won't be in production until approximately mid-September. If you get in touch with Tech Support in September when they're available we can arrange for a replacement unit for this issue...

Support; Any status if we may see a new release within the next month? still same list as mentioned above, any changes, removal, additions? Just returned from a trip around the country, Skyviews and the autopilot were fantastic! I did wish I saw the roads and mapping features that are mentioned...

I had an issue where my SV700 with no battery backup would go into a reboot with the same symptoms you mention. That was resolved, I think with a firmware upgrade. I needed to power it off than reboot it and it would work okay, sometimes after 1-3 reboots. Are you running the latest firmware? do...

Been there and done that. Nothing you can do when it boots up, was actually advised that is was normal. Quiet after it is booted up so I have lived with it. Now the EGT spikes when I press the transmit button has been hard however. I am climbing and the egts/chts are high. the initial contact...

Weasel, happen to be flying across the southeast in my RV-10, heading back to Ca. I got the same issue with a couple app/dep. in one case they told me to squawk Vfr, I called the next controller and never had an issue. I see the R on the sky view and everything looks normal. I think it's on...

re-asking Support; Any progress on what the current list of priorities are for the next release? Thanks!

Support; Any progress on what the current list of priorities are for the next release? Thanks!

I only have it on one display and it always works. It IS the one that is always powered on first.