Search results

First of all, thank you all for your replies. I really appreciated them. I did exactly like @rjones560 mentioned. Wired everything as described (sensor is working with the app so, wiring is good). Downloaded and installed the widget from Aithre site (latest update is from Dec. 2020, if I am not...

That's exactly what I did :) I thought I needed to do something else, as I keep seeing the X over the widget.

No idea about what you mean by "files". I just configured the sensor mapping (under EMS Sensor Mapping) and the widget (under the Screen Layout Editor) numbers inside the Skyview. Do I need to setup anything else?

From where/whom did you get the widget? Asking because I have installed the Aithre system but, it is not reading anything from the Skyview (I just get the X over the widget) but it is working fine with the Aithre app.

I moved my adahs to a new tray, a few inches from the original position. I also moved the GPS two feet to the front of the aircraft (a few inches lower than before). I am trying to find any info on how to (if needed) to re-calibrate the two items. Thoughts?

Thanks Tim and Jake. Really appreciated. So, just to confirm, I can keep flying and reporting to towers the new number, while the registration branch still works on the new docs, right?

Thanks, Jake. I am not sure about the Transponder Hex code. Is it something the Skyview will auto-generate when I change the number in the configuration or do I need to get it from someplace else?

I have the authorization to change my N number. I am using a full Dynon Skyview solution (GPS, transponder, radios, you name it). Any ideas on how to properly do the change or is it just as simple as changing the current number with the new one in the Aircraft settings?

The shunt is wired to the alternator (it is a Velocity, with the battery far away in the front, while the shunt is close to the engine in the back).

:) battery will need some flight hours until it’s fully charged.

I have the shunt connected to the EMS and configured (I assume properly) in the Skyview. However (I know this picture was taken on the ground but I have the same results while flying with the ALT on), I just get this "Crossed" widget nothing showing any info about the amps. Any ideas on how to...

I have installed a backup battery for my Skyview HDX display. However, because the battery is not fully charged, I keep receiving an alert/warning/message about the issue. My problem is, even reading the alert, I keep getting the audio message over and over. My workaround was to disable the...

The article mentioned about the decision for a farther airport (instead of the closest one) due to the winds... To me, the most important thing is to have my workload reduced with an unexpected engine failure.

To those ones still not sure if Smart Glide is a good idea or not: https://www.aopa.org/news-and-media/all-news/2021/december/16/flight-deck-tech?utm_source=epilot&utm_medium=email Come on Dynon, help us here!

Thanks for the info Ken. I am considering all those things. My only factor at this moment is the price difference ($4.4k for the 175 against who knows how much for the IFD410, as I couldn't find any website with the price for this device).

Thanks Bill. I will check that. Will it mention template size (for cutting) and how to support the device?

Anyone who has experience with Avidyne IFD410? I am trying to decided which route to take (GPS175 or IFD410). Also, any ideas where I can find the IFD installation manual? Will I need a specific tray to install it? Thanks! Alex

I have contacted both (but no answers from any of them). Anyways, I found a way to keep the Dynon intercom with a NAV radio. Thank you!

I was ready to pull the trigger with the AV30 when I noticed that a G5+backup battery is close to $100 bucks cheaper than the AV30. I am back to the calculator :)

How happy are you with the AV30? Asking because they have a Black Friday promo today, giving the AV-Link for free with the purchase of the AV30E. Did you install it yourself? How hard was that? Also, are you using the OAT probe?