Search results

Like many other owners, I only have one Dynon Skyview display and, after having my LCD display malfunctioned while flying (twice), I decided to install a backup attitude indicator but, what about the my engine data? Even with the LCD issue, the engine data is still there (in my cases, the WiFi...

Just made it to work after revisiting the wires. Thanks for the patience!

Just made it to work after revisiting the wires. Thanks for the patience!

Thank you! I tried to replicate it here but, emulating the SL30 on Dynon does not send anything. I can only getting TX if I set to GNC225. I'll keep digging.

No, I haven't. Just followed MGL's manual. I will try tomorrow but the rates are preset when you select a device template and the rates are not accessible.

@RV14_TD which setup are you using in your Serial configuration? (btw, my setup is an N16 connected to a Vega head). I double-checked my wiring and it is looking good. Then I focused on the Dynon setup and changed from SL30 to GNC225 and GTR225 - In these setups, I see the Dynon TX counter...

I double-checked the wiring and it is looking good. Then I focused on the Dynon setup and changed from SL30 to GNC225 and GTR225 - In these setups, I see the Dynon TX counter numbers going up but the Vega is not receiving anything. However, nothing coming from the RX counter. I am pretty...

It sucks having to spend money again with things you have already purchased. Worse than that is spending the money not being sure the new adapter will fix the issue... :(

I have the latest software update on my HDX 11 (older model). Flying with my iPad for the first time today, the wifi connection dropped around 15min after take-off. My wifi adapter is the older one. Is this issue fixed? Do I need the new adapter?

I guess my question was how can you input the frequency and send it to N16? With the COM, all I do is touch it, tap the numbers and it is done. How can I do that for the NAV radio? I hope the question it is clear.

I have it configured as per instructions from Advanced and MGL (but probably there is something wrong with the connection) because, like I said, I couldn't find a way to see it in the HDX. If I may, where in the HDX do you see the N16 frequencies? The top bar?

How did you set your HDX to be able to set N16 frequencies from the display? In my setup, (N16 connect to HDX via Advance Control Module), I cannot see anything (frequency nor HSI) from the N16 on the HDX. - see my other thread here...

Hi, I have a MGL N16 radio connected to my HDX11 via Advanced Control Module. However, never used it, nor paid attention till yesterday, when I was doing a transponder check and asked the technician to check the nav radio. Here what we found: - Antenna works fine, as well as the radio and the...

Thanks @RV8JD - I will take a look. This is different that what I was used to when I had my other plane with the D120 and the AP head. All I had to do was to change the bug and the AP would follow :)

HI, I am trying to get familiar with my HDX and I noticed that after setting my altitude to 3200ft (see attached), the AP ALT kept showing 3100ft. Any ideas why?

Taking advantage, which pin did you use for your header tank?

Thanks Rhino! However, I’m not feeling that adventurous. I was just hoping someone had tested this solution before.

I am curious to hear if your Amazon one worked.

Nice! Where are you based? Would love to connect.

Interesting news (I have the same issue with both ports used by the Wifi adapter and the maps drive) as I always wanted to install a video adapter but don't have another port. Do you think this adapter would work https://www.amazon.com/dp/B09C5WNNLZ/ref=emc_b_5_i?th=1?