Search results

If Dynon is not willing to provide a dual band receiver, why not allow reception from a Stratus/Stratux, etc? I understand the business argument that they would reduce demand for their receiver but either the dual band demand is so high they should acquiesce to the demand or it is low enough...

So a newly installed SV-261 with a GPS-2020 will not qualify for the rebate? I just flew with the newly installed SV-261 and a GPS-250 and finally obtained the report and my NIC was 6 and the SDA/SIL was 1 (expected, right?) so the report was a FAIL from the rebate standpoint. Sounds like...

The 250 is valid until 1/1/2020. Dynon already confirmed this on a separate post. The unit is listed as a option on the FAA web site when you request the report. Craig

For the $500 rebate. Why pay for the 2020 when it gets me nothing until 1/12020? Craig

I'll recheck my transponder config again. Craig

Hi, How long after the flight were you able to get a report? I have not been able to get any feedback after two flights. I'm selecting the Trig TT-22 transponder, what do I select for the GPS - the 250 is currently installed. Craig

Actually, it's looking highly likely. When I called to order my HDX800 the day they announced it available the salesman asked if I was sure I didn't want to wait and take advantage of the trade in program that was going to be available early 2017. Obviously the salesman could have been...

Hi, I posted twice because I inadvertently posted in the GA Forum. The answer I was looking for was at least partially provided by Dynon -Hobbs and Tach are not exported. Regards, Craig

The installation manual states "most" settings will be exported. I am replacing my SVD700 with Evan HDX. Will there be anything of note I need to reconfigure after loading my saved settings file? Craig

Placed my order today! Will hopefully ship Friday. :D

No comment Dynon???? :-X Craig

Hi, Any update on availability of the SV-HDX800? Still probable for this year? Regards, Craig

So I'll take the response from Dynon as a "no" or "not at the moment". :-) Thanks to all for the alternative solutions! Craig

Primarily streaming music. Thanks for the speedy response! Craig

Dear Dynon, Any hope of a Skyview compatible intercom or audio panel so equipped? Regards, Craig

Nice!!!! Status of trade-up program? Regards, Craig

The attachments demonstrate the data I see on the C37_P26 pin versus the value displayed on the screen (about 6 inhg too high). Double checked the connections including ground and they look fine. The manifold input is currently unconnected so blockage is not the issue. Other things to check?

I had the opportunity to play with the unit at Osh and as long as the feature remains in the final version of 15, you can disable the EMS on the bottom band. Same hardware as the current Skyview according to Dynon.  They did a processor upgrade at some point in the production run that the rest...

Dynon tends to announce new hardware/software at/near Airventure. Any hints????? :D

Ugh. So the lesson is RBothTFM's!!! I scoured the installation manual looking for this limitation, couldn't find it. (I look forward to that being pointed out!) Seems like the section on USB Flash Drive Considerations on page 3-17 would have been a logical place to reference this limitation...