Search results

Is the Skyview RX for that port also assigned to the GTX327?

On the subject of hand tweaking the ENGINE page I placed some gauges/info items on top or inside others with good effects. But once in a while the one I want in the background is on top. Is there a hard and fast rule for how the gauges are drawn on the screen and which are drawn on top of...

Not sure for standard IO. My efii system needs 35 PSI without the engine running and is 32-34 at cruise.

You could have missed the last point. It's not clear what you should do with the last add. Press add or press full? I think you are suppose to press add then full. You can add a point without recalibrating as Stephen says. Go back to the calibration screen. It will tell you the voltage of the...

The IO (fuel injection) will have a lot higher pressure then O (carburetor). I had 1 - 5 PSI on my O320 before I upgraded. There are no setting on Skyview other then the choice of pressure sensor. Do you have the correct sensor selected? There also is a new sensor file download since the new...

Yep. That's what the problem was. Works like a charm now. Thanks

If you are making your own harnesses Appendix C of the Installation Manual has the specs:

Did you check for serial activity on the SV-GPS-250 port (should be Port 5)? Does the GPS have a clear view of the sky? The other GPS won't work until you solve the network problem.

I had my GTX327 firmware updated for it to work. If you don't have an option of REMOTE for the RS232 output on CHNL 1 of the GTX327 you will need to update the firmware. Hold the FUNC key while turning on GTX327 to get to the configuration pages. Both serial wires need to be connected. Skyview...

If it didn't find the ARCINC or ADAHRS and they are both on the same network cable I would look at that wiring. You can check for serial activity on the serial port that you connected the GPS to under the Local Display Setup Menu. Are we talking about the SV-GPS-250? or the 430W?

Perhaps it doesn't see the ADAHRS and EMS yet. Try a network update. Press buttons 7 and 8 and then select the System Setup Menu. Should be a network detect option.

I think the basemap is a great upgrade in itself. :)

I'll check the wiring tomorrow but now that you mention it, I'm pretty sure that the new cube is the upstream cube and is on pin 19. If it is I'll switch the wires.

One use to consider for the discrete input on the Skyview harness would be to take a screen shot.

I haven't solved this yet. There is activity in the debug data. Some pictures:

The GTX327 is just mode C. The GTX330 is mode S which is what is required for ADS-B. Dynon's is a mode S.

jchang. I have a lot more stuff on the 50% screen but unless I'm doing some testing, I fly with less on the 20%. You could squeeze your EGT/CHT widget to 75% of the height by changing the params. Ignore the offsets and size shown below. EGT_CHT_WIDGET={...

There is some information here: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1307327492 and here http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1313520134

True. If I move my GPS (in only) or Traffic (ZAON) (in only) to the same port as the transponder I would loose the display of the transponder info on the SV screen but I would gain a port. I also could upgrade to the SV-XPNDR-26X and get traffic there when it's available to free up a port. Port...

It was inevitable. I maxed out my serial ports. They are all used. Port 1: xponder Port 2: GPS Port 3: Traffic Port 4: VP-X Port 5: SV-GPS-250 Does that mean I can't add anything more? Should I worry about not being able to add a NAV/COMM. Can I optimize the ports I'm using. Will adding a GTN...