Search results

From the email announcement:

Congratulations Dynon. Great work.  :) I can see that this update deserves the major number increment. Can't wait to try out the new features.

Are discrete inputs a feature that is considered for the near future? When you do implement discrete inputs it would be nice if they were programmable. A suggested list of programmable functions could be anything that could be done with a series of keystrokes with the buttons on Skyview. A...

There is a poll to record the number of ports you are using here: dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1338252641

Assuming the diametre of the earth is 8000 miles, at 50 miles a 1500 foot high object would be below the horizon. On the other hand, if I was 1500 feet above the surface I could see the horizon +/- 50 miles away.

I just returned from a xcountry flight and ran into a problem with the flight plan I imported from PocketFMS. I inadvertently had the same two waypoints in a row. Skyview got stuck and wouldn't advance to the next course. It wanted me to go back to the waypoint it got stuck on. I'm already past...

Just accept what the gauges are reading. That will zero the fuel added for the next time you turn the SV on.

Bruno Not sure about the ferrets. I'm not a radio tech. I was thinking that is everything is connected through the AP-60 Audio Mixer then even if you switch to isolate, all that stuff should still come through to the pilot. I think that all isolate does on the FlightCom is isolate the pilot...

When you connect a USB stick to Skyview the System Software menu (press and hold buttons 7 and 8) become available and you can export the settings. Page 3-14 of the installation manual. SETUP MENU > SYSTEM SOFTWARE > EXPORT SETTINGS. It creates two files. One for sensor definitions and one for...

Bruno When you switch to isolate, input from the crew and the music/aux inputs would be cut off, but anything coming from the radio (AP-60 Audio Mixer) would still come through to the pilot. But you're saying Skyview audio is not coming through? Is Skyview connected to the AP-60 Audio Mixer or...

Keep working at it. ;D

Hmmm. If you're getting the Dynon Skyview at startup it's working. My intercomm mutes other channels when there is something coming through the COM. If that's happening the warnings would be muted. The other possibility is the isolate doesn't allow anything other then the COM. What do you have...

Perhaps do a network scan. SETUP MENU > SYSTEM SETUP > NETWORK SETUP > CONFIGURE. The Skyview is made to work without the EMS. Once it decides there is no EMS it should stop complaining.

I tried Fahrenheit but all the temperatures were nearly twice as hot. :( If you remember the discussion on round gauges a while back, general consensus was that it didn't matter what the numbers were, it was the position of the indicator that they were looking for. The original EGT gauges...

I'm going to wade in on the PocketFMS discussion. I downloaded the 30 day trial and was a little disappointed that two of the local airports near CYXE were missing. I did a nearest on Skyview with the Jeppesen data and compared that with the PocketFMS on my computer. I contacted Pocket FMS and...

Check in the settings SETUP MENU > SYSTEM SETUP > AUDIO SETUP to see a list of audio messages that you can turn on or off. Perhaps your volume is too low (setting on same page). I get leaving altitude, auto pilot engaged/disengaged, nice landing, traffic unavailable and others. You should at...

Some screenshots of the EGT's. First is on the ground and then 15 and 16 minutes into the flight. Notice the green grass runway. It showed up when I switched to PocketFMS. The airport was there with Jeppeson, but not the runway in SV.

Another thought. As mentioned on this forum before, the GPS direction isn't working until you are going fast enough. The outline on the map direction will turn purple when it is getting GPS direction. See previous post. Otherwise it's white indicating that it is magnetic compass direction. See...

IMHO I don't think the ADAHRS is that sensitive. I did mine on the rebar reinforced concrete runup pad. I marked the cardinal directions on the pad using Topcon RTK GPS. It's an accurate representation of magnetic direction and reflected in my calibration of the ADAHRS. I believe that if your...

It's intermittent but I was thinking a non connection is usually max display not minimum. Worth a check for sure. I can probably reach the connection in flight if I have a copilot when it happens next.