Search results

Hi Guys, Last week I started seeing a failed indicator (red X) on my fuel pressure gauge when I turned on the electric boost pump in my RV7. Normal fuel pressure with the mechanical pump is around 25psi and the electric fuel pump (fuel injected engine) takes this to about 30psi. Besides the...

Excellent thanks

I does not work. I was wondering/hoping that Dynon might chime in or perhaps acknowledge that larger capacity memory sticks would be supported in the future. Not a big issue I guess, just annoying. ;)

Hi Guys, Besides the default FAT32, will SKyView recognize and read an NTFS formatted memory stick? Reason I ask is that I have a 32G stick that I carry around all the time and its a real pain to have to also carry a second 4G stick just to load map updated etc. Cheers Eddie

I did all my calibrations in the landing configuration; Power off, no flaps, stall, recover Power off, full flaps, stall, recover Having said that I need to do them again as my stall warning starts to go off a little too soon. Cheers Eddie

Just to add to this thread, with my backup battery connected I get the same result as people above, where I have to cycle the power to get it to boot, with the backup battery disconnected my SV-1000 boots after about 4-5 seconds. Cheers Eddie

Strangely enough I had the same issues before I upgraded to V5.1, since then all has been OK. Before the upgrade on some occasions I had to do a forced discovery, other times just rediscovering of the network was fine. For the comments that say wiring issue how would rediscovering the network...

Thanks Support, I'll see if the servo continues to miss-behave over the next two weeks and if so will call support and see what can be organized. Cheers Eddie

Hi Dynon support, Any additional thoughts or questions ? Cheers Eddie

Also looking at the network status the roll servo is not listed at all, but appears after doing the network discovery or forced load. Cheers Eddie

Can't wait for data logging to become svailsble :)

Sometimes doing a network discovery works, if that does not find the roll servo then doing a force network load always works. Cheers Eddie

Hi Guys, I have been flying with the Skyview system for 6months, with auto pilot working fine, I upgraded to V5.0 software about 2 weeks ago and since then, each time I go for a fly I need to rediscover the Roll Servo, Pitch seems to be fine. Sometimes it works fine just doing a network...

Thanks for the reply Cheers Eddie

Hi Guys, I currenty have my Skyview setup with the defaults for a Lycoming IO-360 fuel injected engine. My display indicates that I am running LOP or ROP and gives me the current % Power being developed. What is the name of the widget that indicates the number of degress lean or rich of...

Hi Guys, Any heads up on when the data logging feature might become available? Cheers Eddie

Hi Dynon Support Is there any plan to be able to display VFR routes on the map screen in Skyview? This data is available in pocketFMS, but does not display on the Skyview Map page, only the VFR reporting points are displayed. Also from an information perspective is it possible to use the map...

Excellent thanks for the info. Cheers Eddie

Hi Guys, I have loaded PocketFMS Aviation and Obstacle databases and was wondering if it is possible when viewing the GPS Map screen, to go into pan mode using the joy stick and move the cross hairs to an item on the screen and click on it to obtain information for the item i.e. an Airport or...

Thanks Russ, I'll have a go at changing the pulse count. Guess I'll have to wait till I do the final assembly to see if I have the same issues with the G3i Cheers Eddie