Search results

Hi guys How do I change the pulse count for rpm, at present my tachometer is displaying twice the rpm value. I have a lycoming io-180 with a g3i CID ignition that is supplying a square wave pulse count. Many thanks Eddie

***** Data logging ***** I will be running in a new IO-360 so would love to be able to keep logs from the start of the whole process Cheers Eddie ;)

Hi Dynon, I too am at the point in my wiring where if the info were available I would be able to terminate the audio into my intercom. Cheers Eddie ;)

I have  cut this from a previous response  to a post on 'Tach erratic' Do you have the recommended resistors in the RPM sense leads? If you do not have any resistors, you should refer to the install manual to find the value recommended. If you have them installed you may need to increase the...

OK thanks will email tech support. Cheers Eddie

Hi Dynon Support 2 days ago I installed the Dynon backup battery, I have a single 10" Skyview display which was working fine after upgrading to 3.2 When I installed the backup battery 2 days ago everything booted up fine, I powered the display up and down a few times as I am still doing panel...

Thanks for that, much appreciated. Cheers Eddie

Undocumented feature??? The 37 pin sensor harness supplied for the EMS module that I purchased has a 9 pin D-Sub connector on the other end of the wires connected to pins 11, 12 and 13 (orange, yellow, black) of the 37 pin D-Sub connector. Can anyone tell me why this connector would be wired...

Thanks for the info and the fast response, its really appreciated. Cheers Eddie

Hi Dynon, Are there any issues that need to be considered around vibration isolation for the Skyview. I am mounting mine in an RV7. I realise that vibraiton in general is an issue, but if I do a standard panel build as per vans with no isolation mounts for the panel will the display cope OK...

I'd love to see a G meter too. Cheers Eddie

Thanks for the prompt reply. Cheers Eddie

Hi Guys, The data lines that connect the various components in the Skyview network, are these data lines all wired in parallel? The reason I ask is that I have just mounted my ADAHRS in behind the baggage compartment of my RV7 and run the network cable forward to the instrument panel and was...