Search results

I just read on the site that Dynon is saying to disable DSAB on legacy two screen systems due to a dual screen rebooting issue. The DSAB functionality is very important to me. Will the next firmware update solve this issue and allow DSAB to be enabled for IFR flight?

Does my Have Quick TOD have to match JakeJ's? now?

This dedication to customer support and producing the finest product possible at a reasonable price is the reason I will be outfitting my project with Dynon.

Dynon Support will chime in rapidly but the current version downloadable from Dynon contains all previous updates. If you update to the latest version you will have all the modifications and fixes in the previous versions and therefore only need to do one update. Just as a reminder, back up your...

Re: Can ground plane serve as remote compass mount Thanks for letting me know the transponder works OK from inside a plastic airplane jakej. All drag is bad but preventable drag has to be the worst!

Re: Can ground plane serve as remote compass mount What size is the ground plane? Was the antenna already on the plane when you got it (and therefor the reason it is out in the slipstream)?

Re: Can ground plane serve as remote compass mount Fair enough. A separate ground plane for the transponder seems the better way to go given your concerns. Now for the fun part... could I located it below by a couple of feet? What distance would you like to see?

The HS34 is definitely part of the plan. Is there a listing of radios that output over ARINC? I would assume a KX 170 does not but what about the KX 155/165 series? Any of the Narco or Terra stuff?

I know Garmin 530, 430, 480, SL 30 and SL 40 will all feed the HSI in the D180 and D100 from reading here. What other nav radios will do this?

Re: Can ground plane serve as remote compass mount Post removed, reset Mode 4 and execute RTF protocol.

I am building a Glasair and am planning to construct a "shelf" attached to the sides of the fuselage in the back to provide a mount point for the remote compass units of a D180 and D100. It occurred to me I might make the actual shelf out of aluminum and perhaps mount both the ELT and...

Hi Dave, I know Dynon Support will chime in with their response but let me add my two cents. I think your diagnosis has shown your D180 will switch to it's battery as planned when the main charging unit goes down and the battery has drained below the threshold it looks for. I know you can set a...

If it is not possible to offer a choice, count me among those who will not use Jepps.

Amazingly fast response. The Dynon Support folks are the primary reason my panel will have Dynon displays. Thanks!

Thanks for the information. Since it is supported, can I assume that once installed it is chosen from a configuration menu or does it not matter in that the output is the same two wires?

Does the D180 support a Hall Effect sensor to read current? This would provide me a cleaner install and two less big wire connections. I know Advanced sells a Hall Effect for amperage but have not found other senesors. If the D180 does support this, which sensors are known to work?

I have been planning to use a D180/D100 combo in the Glasair I am building. With the release of the full details on the Skyview, I can consider this but have a couple of questions. Can the Synthetic Vision be turned off? I find this very distracting to a true IFR platform. I think I saw that it...

I have a friend who just received a pitch servo for a plane he is building. His plane is an RV6 so the mounting kit is for that aircraft. The bracket which holds the servo would serve well for the roll servo in my Glasair and could even be used for the pitch servo if I added a slight mod. The...

Thanks Dynon. I think I can meet both of those distances without issue. How far from the D180 or D100 must the remote compass be? I should have said DSAB when I said serial. Just to clarify, it is the DSAB which connects from D180 to 396 to Garmin 480 to GTX 327 etc correct?

How close to the D180 can the remote compass be located? How far away from a magneto? How far from a standard magnetic compass? I am considering putting the remote compass behind the instrument panel since there is a huge amount of room to do so in a Glasair IIS. Leading the wiring all the way...