Search results

I know this is bit backwards however... Can SV be set up for a fuel tank with a simple on/off float valve switch with the logic being : - when the float is up the switch is open and no path to ground - when the float is down the switch is closed a path to ground If so i can make a fuel...

THANKS for the advice!!!

Can someone please give me some advice on how to calibrate my fuel system? The airplane has two 40 gallon wing tanks that gravity feed into a 4-ish gallon header tank and from the header tank the engine gets its fuel (no return from engine). The wing takes will have capacitance probes and the...

thanks for the feedback. I have a 0 - 12 volt potentiometer and ithe swiped has a smooth linear change from zero to 12 VDC. I have since fiddled with the values and therefore do not remember what the default values were so I cannot return to original. When the values were default it did not...

I installed an external dimmer potentiometer using PIN 25 and it works however the dimming function seems to be "choppy" meaning that the display brightness goes up and down in large steps and not very smooth, I fiddled around with the voltages of the various steps however I cannot seem to get...

>Are you running two amps measurements? The pins on the EMS for the Dynon amps shunt can only be used for the amps shunt so the only way to be out of pins is to have already used one in the system. Yes. I have two electrical systems and each needs to be monitored by the EMS. PINS 24 and 25...

Has anyone used the McLagan Enterprises "High Accuracy Current Sensor"? https://www.crazedpilot.com/brands/McLagan-Enterprises.html They advertise it is compatible with SV and even list page 7-53 as the method to install it however that is the wrong page. Does anyone have any feedback on this...

Dynon, Thank you for your answer...very informative and helpful. I apologize that this thread became abrasive and that I was impatient. I am really making progress on this build and my days off are limited however I am making progress. The Dynon systems are getting very advanced and with...

I bought a CS-02 from AS and during the installation the wire connector broke off.  Grand Rapids was nice enough and replaced it and then while installing the second unit it also broke apart. See picture. It seems that the design of this unit is very poor and that a slight tug on the three...

>He's suggesting using a completely external PWM dimmer that has no connection to the SV at all, simply a dimmer knob that is mounted on your panel.... This is pretty basic stuff... Nice...There are other topic forums that I frequent where I do have some expertise/experience to share and when...

>you might want to think about just buying a relatively inexpensive external PWM dimmer to mount to your panel. Thank N214ST you for your kind advice. I just today had an email exchange with Eric Jones about his dimmer unit. It is my understanding that a PWM dimmer will not work for the PIN...

krw5927, Thank you for your feedback and experience on this. The EAA chapter near my house is extremely small and there is no one who has this kind of experience that can help so therefore I am grateful for your advice.

Vern, I am VERY GRATEFUL for your time and help!!! Thanks again.

>There are also lots of chat sites with electronic geeks that would be happy to help you out. Yes... those "electronic geeks" on the premier experimental electronic aviation forum are substantially more helpful and supportive than the Dynon Tech "Support" people on the Dynon Tech Support...

Dynon Tech Support, Your website states "A SINGLE FOCUS ...stand behind our products with the industry's best support. I did NOT ask you to design anything.  Please understand that I have bought THOUSANDS OF DOLLARS OF EQUIPMENT FROM YOUR COMPANY and the salesperson said that you will...

Vern-X, Thank you for your time and the schematic you wrote up. I did not want Dynon Tech Support to design my system I do however would like them to verify that my wiring plan is accurate because the text of the manual is not clear enough for me to understand the system. Dynon. Tech support...

Dynon Tech Support would you PLEASE be so kind as to answer this question?

Thanks All for the advice. Yes I have the SV ARINC and the SV AUTOPILOT with KNOBS and AP PANEL. I can't wait to see all of the pretty colors

THANKS guys...I GREATLY APPRECIATE your help!!!

Hi All, Getting closer to SkyView Bliss... Can you please confirm my wiring plan for the following system: -Dual SV-1000 -RockRack switches with switch face LED that illuminates when the switch is ON. -Ten OHM potentiometer I want the SV displays to dim and my switch face...