Search results

This is second one I've experienced this year. Master on and all system were initialized. I hit the starter button and the PFD rebooted with System Event 20 and System Event 21 errors. It has also happen to my wingman, whose install is identical to mine. We both have all Dynon Advanced...

For the same reason why you should care if your engine, propeller, wheels, brakes, instruments, hoses, lights, bolts, nuts, screws, ...... are certified. If they are not then it is your responsibility to ensure whatever is installed is fit for purpose and doesn't impede safe operations. Not...

Thanks for the confirmation. I have submitted a tech support request on this issue. Will update this thread when able. 4/12/2024. Case closed. Function now working after changing config file to: canopy_warn_rpm_v16=1750

@felix1973, were you able to resolve this issue? I just installed a Canopy switch sensor in an RV-6. Sensor & display works as documented but I can’t get SkyView HDX 16.7 to honor the rpm threshold before alerting. Want to taxi without alerting. Loaded new dfg file with 1750 rpm. No joy...

Unfortunately, no. You can export the data for review but there is no real time capability to view past flights

Case Closed! Owenssonex comment gave me pause. ..I went to the airport today and tested the reboot key under ship's power. It works as expected. Tested it again operating on backup power and it doesn't work. This is by design. From Dynon, "Ok, so that is working as it should, backup...

I haven't tried it without the backup battery connected. In my case, I am using Dynon - Advanced Flight Systems ACM. The backup batteries connect to the ACM, not the screens. Buttons 2 & 5 reliably work, with the exception noted in my post above (Functions not invoked when button pressed)...

Anyone else experiencing this problem? Two HDX 10 inch touch screens. Latest firmware (16.7) has been installed. System is a little over a year old. Failure was noted before upgrading to 16.7. Simultaneously pressing the 1+2+5 key just shuts the system down. It doesn't work on the PFD or...

This may not be the same problem, but I am having similar issues regarding pressing buttons and not having functions invoked. So is my wingman. I have the latest screens/hardware/firmware. I sent my units back to Dynon. Turns out my problem is a software issue. I have my screens back (with...

February 15, 2024 update: I contacted Dynon. They thought the problem may be with the hardware so I sent my two HDX screens to Dynon for repair. Turns out that this was not a hardware issue but a software issue. Dynon was able to reproduce the problem using my configuration. However...

The K factor is a function of the fuel flow transducer, not Skyview. You will be able to find the K factor on the the manufacturer's website of the fuel flow transducer installed in your aircraft. I.E. Floscan, Red Cube, Electronics International, ...... The best description of how to...

I have a dual screen HDX panel and my AP is configured for expert mode. When you configure the AP for expert mode, the virtual AP panel displayed on the screen is a duplicate of the SV-AP-Panel. When configured for simplified mode, you get a different display. The virtual simplified mode...

Note that the SV-AP-Panel is only active when you have configured the Autopilot for use in expert mode. If you are predominately flying VFR and have configured the Autopilot to use simplified mode, the SV-AP-Panel serves no function.

The only way to know if an update is available is to manually check the ADS-B / Transponder / GPS setup pages after every firmware update to see if they need to be updated. FWIW, the email I received from Dynon stated that the ADS-B/Transponder/GPS components have only been updated once in the...

From a recent email exchanged from Dynon Support I learned that ADS-B, Transponder and GPS updates all have to be handled manually. The process for each is detailed in the installation manual. https://dynonavionics.com/includes/guides/skyview/SkyView_System_Installation_Guide-Rev_AO.pdf

No response?? What's up with that? Solving this problem should have a priority higher than the number 1 can convey!

I don't think it was intended to work that way. From the Ops Manual: "If reversion mode is enabled and active (other display(s) offline), the following display layout settings to be displayed can be selected in Setup. This behavior applies equally whether all but one display in your system has...

Anything new to report? My wingman has a new Skyview HDX system installed. This weekend the PFD screen froze and then rebooted with a System Event 20 error message. Fortunately this happened on the ground while taxiing to the active runway. Diagnostic file was sent to Dynon. This was...

Apologies for the confusion but I don't think we are talking about the same function. I agree with you 100% regarding how the Fuel Computer currently calculates fuel used during the flight and resets that count across engine starts. I don't want that to change. What I am referencing is the...

I respectfully disagree, that is not what I want. As you noted, the SkyView Fuel Computer will accurately keep track of "Gallons Used" and "Gallons Remaining". "Gallons Used" does, and should, reset after every shutdown. The Fuel Computer will be as accurate as the "K" factor of your fuel...