Search results

Awesome, thanks! By the way, is the purpose of connecting the GPS 175 to the ADS-B Out only to provide the ADS-B Out with lat-long data? Because I already have it connected to the Dynon GPS-2020, Is it advisable to use the GPS175 data over the Dynon GPS 2020 data?

Thanks, I'll research that.

Thanks! Confirms my suspicions... I know where to go first now to fix this! I used a clamp with rubber between metal clamp and push rod... Need to put a different claim that is metal on metal and put a small set screw or a small bolt through the clamp and push rod to tighten and prevent slippage.

Should I use the same pinouts for the Garmin GPS175 db25 connector as are specified for the Garmin 430/530 in the SV-ARINC-429 Installation section of the Skyview Installation guide (Figure 156 on pg 12-6 through 12-8) ? (ignoring the VOR/ILS stuff)

Am I correct that a small amount of play in the connection between Pitch Servo pushrod and the pushrod it attaches to (between the Stick and the Elevator BellCrank) cause the Autopilot to oscillate up and down around the target altitude in Altitude Hold ?

Thanks for your reply. I will go for it. Your HDX screen seem sto take minor abuse well, but an extra layer of protection seems a good idea. hate to scratch screen on $4000 component!

Anyone have any experience with adding Screen protectors to the HDX screen? I am looking at product from Photodon... Dynon SkyView HDX 1100 10-inch Panel Display Screen Protector (photodon.com) Does it negatively impact touch functionality or anti-glare visibility or clarity at all?

Yes, that simple rule would have saved me much confusion, but I relied on left-right interpretation of pictures labeled "View from the back", and ended up reversing things. and to make the confusion worse, since I used reversed cables from components to hub, AND from HUB to HDX, I was reversing...

Yes! That may have contributed to my confusion when I originally built the network wires. In hindsight, for a network connection wire, front, back, insertion side, numbers, none of that really matters. What matters is that all the wires are in the same hole on both ends, (which in my confusion...

Your image shows pin 1 as being on right side of top row (row with 5 pins), so it is looking from the back, where you insert the pins, right? Anyway, I now have a tentative hypothesis about what is happening. I think when I wired the cable coming from the EMS, three years ago, I miswired it and...

When creating my own Skyview Network cable, I thought I should connect pin1 to pin1 , pin2 to pin2, etc., all the way to pin9 connected to pin9. But when you look at the end of the female DB-9 connectors on a network cable that shipped with my Dynon HDX system, and do a continuity check on them...

Also, fwiw, the radio began transmitting okay day before yesterday, and sidetones came back. Also, the ability to transfer frequencies from HDX database into SV- COM-PANEL began to work again. However, the missing items on HDX screen are still missing.

Have already, and after checking wiring continuity (all were good), consensus was to RMA it back to you. It was delivered to your offices this morning at 10:59 am. As mentioned in enclosed letter, if at all possible, I would prefer to get the newer SV-COM-T25 transceiver unit (from Trig) rather...

Today I had issue with Transmitter on Com Transceiver (SV-COM-C25 with SV-COM-425). Reception was fine on all frequencies, but I could hear no side tone when I pushed PTT button and spoke, and although ground control could hear me but said that my transmissions were weak and unreadable. When I...

How about just for inflight (Cruise) Navigation from one waypoint to another? How do I get altitudes into flight plan? I have a VAL NAV2000 VOR/ILS receiver which IS an IFR Navigator...

I just noticed that the What's New page does not mention adding altitudes to Flight Plan waypoints. Is this feature in Version 16 or not? And if it is, How do I access it?

What (if any) ELTs can accept external GPS data from the GPS-2020 ? How about the ACK E-04 406 MHZ ELT (Iavailable from Aircraftr Spruce for $611)? ACK E-04 406 MHZ ELT KIT WITH WHIP ANTENNA USA | Aircraft Spruce

So when is V17 coming out? <grin/>

Great news!

Can I hope that this bug is addressed in V16 ?