Search results

Sorry to say this is not true, please see a demonstration of this in my RV7, base to final turn helping with inturn rudder, note if we where at 500ft we would be dead; https://youtu.be/8wPCaazpU5k

Thanks for that I rarely get to this forum via the main page so missed this advice Perhaps a sticky notice in the forum would also be a good idea :D Cheers Eddie

Hi Guys, I was just about to download 14.0.1 and noticed it has become unavailable, can you provide an update on whats happening ? Cheers Eddue

The device named is Dynon SV-GPS-250 on serial port 5, serial function POS1 -------------------------------------------------------------------------------- This is the email that I am sending to support; Hi Guys Your support person on the Skyview forum suggested I get in touch. I upgraded...

I am perplexed as to why this has stopped working, I only replaced the GPS 3 months ago, it worked fine up till 2 days ago when I did the software update? Any ideas on how to test that the GPS is still functioning would be appreciated. I am no seeing any Rx data but can see Tx data so that was...

That was meant to say turn the Garmin off and I only see the pfd with no synthetic vision Eddie

Went for a fly and even though I am seeing data the gps is still off line ? I only get synthetic vision when the Garmin gps is selected, turn the Garminoff and I get just the off display even with the Skyview selected as the hsi source ?? Cheers Eddie

I have rest as suggested, now seeing Tx count going up, any idea why this happened ? Thank you Eddie

Ok will give that a try, I upgraded from V13.x Eddie

Hi guys, This may be coincidental, but, I installed version 14 of the software yesterday including engine sensor data file and now my Skyview GPS won't come online. It was working fine before this. I am also seeing the error message No ADSB out displayed. The GPS is on serial port 5, Pos1, but...

Hi Guys, I am still waiting for someone in support to respond to my questions? I have sent 3 emails so far. Regards Eddie

That is definitely not the case Eddie

Hello, I sent support an email yesterday but have not had a response ? Cheers Eddie

Thanks Jake ;-)

I am running the latest version of the software Cheers Eddie

OK will do thanks Eddie

My pitch servo has the same annunciation telling me to rim down or up and a similar result when I disconnect in that the aircraft is pretty well trimmed. Otherwise solid as a rock most of the time except for my current failure mode which I need to investigate. Cheers Eddie

Hi Support, What are the steps that I should follow to fault find this, I understand how to check the wiring but how do I fault find the servo? Regards Eddie

Hi Guys, Last weekend I was flying in moderate turbulence using the auto pilot and it was doing really well in all the thermals. After about 1 hour I started getting pitch slip messages and shortly after that the auto pilot disengaged with a audible warning message. When I tried to re-engage...