Search results

If it's getting adequate power (<10V), it may need to be seen for repair. Our support team's contact info is in our signature.

Dynon has issued a Technical Service Bulletin for certain SkyView HDX displays equipped with Wi-Fi Adapters. Some Experimental SkyView HDX displays - manufactured during or after March 2022 - can exhibit adverse behaviors when equipped with Wi-Fi Adapters (Dynon p/n 102405-000). These...

Flight plan information isn't sent over from the portables. You'll only get that from a panel-mounted navigator connected via the ARINC-429 connection.

There's a chance this is wrong (since we know know the innards of the TT autopilot). But, when you're in GPSS mode, the navigator actually asks for bank angles to the autopilot. In effect, it's part of the command loop, and so that's why you're seeing that behavior. In contrast, the NMEA data...

The GPS 175 is fully supported via the SV-ARINC-429. If it has aviation or NMEA output, though, the AP should be able to track the CDI. However, certain items like vertical guidance are only available over the ARINC connection.

The adjustment settings are meant to be used to compensate for minor mounting misalignments, and are adjustable on the ground or in flight. You generally want to adjust it so that it so that it represents the true attitude of the aircraft (which may not be level on the ground, for example, in a...

Maarten has it right. When some sensors are disconnected, it is easy to determine. For others, it is not as obvious at a signal level.

SkyView should start when the master starts providing power. If it doesn't, there might be something going on there. Boot times are <30 seconds for most displays in the field, although recent hardware changes we've had to make due to global supply chain issues have lengthened that a bit, and...

If the display loses power during the update, it may require a round trip to us to fix (although we have some advanced ways to help in the field that can recover units in some cases). We're generally referring to not using SkyView's backup battery. If your aircraft battery is well-charged, you...

One thing you might look at is the SkyView Network status page. Does it show you which wires and devices it thinks are offline? (admittedly, this might be hard to catch with one display, especially if it's intermittent)

When did you receive your HDX display, out of curiousity?

So the full story is that 16.3 really supports changes to hardware that has some changes due to the global supply chain mess right now. It's shipping only on new displays only right now. To minimize the possibility of introducing bugs, it only contains the hardware support changes, plus a couple...

Probably best to get in touch with our support team. Contact info in signature.

Fundamentally, you're importing/exporting the flight plan, which is completely independent of the autopilot in that sense. The Autopilot will follow whatever is on the HSI. If the HSI is set to the SkyView flight plan (which was previously imported via SkyDemon), it will fly in either expert or...

Yes - you can use a serial out ports from the SV-D1000, set to NMEA full.

Once you've selected an item via the SENSOR or INFO buttons in the editor, the knobs move the widget around, kind of like an etch-a-sketch.

I'm not sure which of the following it is, but it's likely ether that: 1) a later software update for the 327 added a compatible format 2) the REMOTE format actually does the trick, or 3) The 327 is actually different than the 330/335 in this respect, and they're erroneously lumped in together...

I'd suggest getting in touch with our support team directly on this one at the contact info in our signature.

Yep. Could change in the future, but no promises.

Yeah. That could possibly change in the future, but that's the current state.