Search results

I think you need to look in the installaton guide not the users guide.

Did this problem ever get resolved and if so, what was the resolution?

You have to tilt the D10a to get your pitch and yaw changes. the EDC10a does heading changes.  The AHRS is built into the D10a.

Try pages 235, 337, and 338 to see lists.

Can you get a new face plate for the intercom if you want to change the orientation from horizontal to vertical or vice-versa?

This works for the single freqs to STBY. It will not do the whole airport push using Skyview. When I had a Garmin 496 hooked up , I could do the whole airport push and use RCL.

I have to push twice on the button to transfer the frequency to the Icom A210. I have reported it before and Dynon is looking into it.

Did you go to SETUP MENU > SYSTEM SETUP > DISPLAYED COM and select the radio to display?

Thanks!

Does the Dynon Intercom come with an wiring harness. It was unclear to me. The website says it comes with jacks. I do not see a wiring harness listed separately anywhere. Or do you have to make your own harness up? Regards, Tom Velvick

Here you go. Its kind of a hidden setting. Press Menu twice to ope the Main Menu Use the ROCKER to select Setup from the vertical tab list Select Interface from the row of tabs along the top Highlight the field below Serial Data Format. Press Enter Select NMEA In/NMEA Out. Press Enter Press...

Remove the internal battery and see if it will power up without it installed?

Whenever I hear of readings flickering/oscillating, I start wondering if there is a grounding problem.

You don't upload the files. They stay on the USB stick. Just leave it plugged in and Skyview will use them from the stick.

OUCH!

I have the Status dual receiver that I use with Foreflight on my iPad.  With the 1090 antenna, I pick up mostly high altitude jet traffic.   I ended up turning the distance traffic off as a lot of times the high altitude traffic is going directly overhead or close by (horizontal distance wise)...

You can buy the license online at the Dynon website and they will email you the code to enter into your Dynon unit to re-enable the mapping function. Regards, Thomas velvick

I uploaded a zipped diagnostic file to http://www.dynonavionics.com/docs/upload.html. I also took a video of having to press the "Tune COM" softkey twice each time. I will post it on the web tonight and send link.

Thanks! I will try to export a diagnostic log tomorrow to send to you.

I think you replied in wrong thread? This thread is about having to press tune com twice to send freq from sky view.