Search results

Looks Good.  :) Also the D-180 Installation Manual has additional information on the converter installation. Skyview should be no different. Have a look at page 9-35 for confirmation of the wire colours and how to connect. The Pin numbers for the converter output connection will be different for...

The Converter ouputs a variable voltage based on the capacitance across the probe (i.e fuel level). It Requires a 10 to 15V DC Supply referenced to Ground. Missing Table will be something like this. Power - Pin 15 (Aux 12V Output) GND - Any Ground Pin Converter Output - Any Enhanced General...

Don't get me started on international standards.  >:( One of my biggest gripes that makes all our lives over complicated.

Dynon, Vertical Power have made the following statement in their forum. Could we have this included as an item in the future feature's list? Maybe also some idea of when we might see this feature. Will all the future features get some kind of scheduled date as part of your shortly...

Check this out. Looks like you will get 1/2 the value of the D-180. http://www.dynonavionics.com/docs/SkyView_Trade-Up.html

To change GPS source manually, I know you use (From information in the Installation Guide) :- SETUP MENU > LOCAL SCREEN SETUP > SERIAL PORT SETUP > SERIAL PORT # SETUP I've also worked out (please correct me if i'm wrong) that the SETUP MENU can be accessed via the INFLIGHT SETUP MENU when in...

Thanks. So If we currently want redundancy with GPS units we should plan to install a switch for selection into a single Serial Port because we cannot manually change GPS selection settings in flight. Correct? Also will ARINC and the backup serial connection from the same GPS unit connected as...

Moving on just a little with this. If in a dual screen setup, I connect two Dynon GPS or Third Party GPS units, each connected to a screen as primary and an additional data feed to the other screen as its secondary source for redundancy. Should I expect the screen(s) to auto switch to the...

Thankyou Dynon. It did register with me that there was a price difference. I hadn't quite grasped the significance of the difference. That pricing really encourages installation of a backup ADAHRS. Well done, all makes sense now.

I've just been having a read of the recently released Skyview documentation and additional web information and also have a few questions about ADAHRS functionality within a Skyview System. 1/ Can you explain the thinking behind two different ADAHRS models. The 30hr limit criteria seems a little...

Thanks for the quick reply. I heard about the excellent Customer Service, now I'm experiencing a little for myself. I was a little confused by this statement as I was sure I had seen a post on this forum about the ARINC interface not adding much to the cost of the current HS34 when someone had...

Agreed. Switched inputs would work when like for like units are being switched, but as you say if the config has to change to look for different labels then this is out. Dynon would need to support the labels for the piece of equipment connected. It would also be a much nicer solution to have...

Will the Skyview system remote Arinc 429 module have more I/O channels than the current 2 available via the HS34 in current systems? The reason I ask is that the information available on the wiki and other forum posts seems to limit the current 429 input uses to just the Garmin range of 429...