Search results

FWIW Many glider airplane EFIS have had this "Green Amoeba" feature for years.

Do what DBRV10 recommended about the setup & ARINC settings. I have the exact same system and approaches are displayed on my SkyView perfect. :cool:

Isn't it also on the purchase documentation or the shipping box? :cool:

FWIW: GPS altitude is best for not hitting objects that are on the Earth's surface. Baro Altitude (Altimeter) is best for not hitting other flying aircraft.

FWIW; Dynon can't have a procedure for this since they can't control static source location(s) on every airplane. Only the builder can control this.

There are several ways of doing this check. Here is a link to a .pdf file of how I did mine: Airspeed Calibration

You mean like this one? "I'm sorry, I'm afraid I can't do that. This conversation can serve no purpose anymore. Goodbye."

^^^^^^^ THIS ^^^^^^^ FWIW: After over 500hrs with my SkyView I have found that if I use this method my engine is at almost the exact same setting as if I had used all the "fancy" EMS numbers. So I no longer even try to use any of the "fancy" EMS methods and just use the old fashion way...

Yes, IF properly connected and configured.

:eek: :eek: :eek: Autocorrect guts me again!!! At least that is my excuse. ;)

Have you done a network configuration update not just a display update? See the SkyView Installation guide Pg 21-7.

AFAIK, no. Autonomous mode is only available on 978MHz units, the DYNON is a 1090MHz device.

Ohhhh a VAN's recommendation not a DYNON recommendation. FWIW I don't have a VAN's airplane.

Exactly.... SHOULD not MUST. :cool:

FWIW: I have had that exact MP sensor mounted on the engine side of the firewall since 2012 and 550hrs with absolutely no problems.

I replaced my "old" spade connectors with the same ones Steveden did. After 200+ hrs, I have not had any problem with my EGT's. YMMV

Not sure about WingX but FltPlanGO can use the DYNON GPS position so I know the data is being sent via WIFI. But you have to use the "CUSTOM > PORT 4000" setting within FLtPlanGO. Does WingX have a "Custom" or "Generic" input setting? Maybe you need a different setting within WingX.

IMHO... If it ain't broke, don't fix it!!! ESPECIALLY in aviation.

It doesn't affect the sensors. It affects the EMS module which causes the system to display a false EGT value. The actual sensors and EGT values are fine. You can send the EMS module back to Dynon and they can fix the problem.

THANKS!!!