Search results

I am building a composite pusher airplane and due to the rather large size of the ADAHRS and/or MAG-236 box size it is it difficult to find a suitable location. In the nose I have a landing light and an electric trim motor. In the tail I have an engine with electronic ignition. T the most...

Page 4-9 Power Input SkyView displays have a primary power input that is compatible with 12 volt and 24 volt systems (10 to 30 volts DC). There are two unterminated solid red primary power input wires (to reduce current loading in each wire-these are not for redundancy and both must be...

>On the RockRacks, there's really two circuits. The the RockRacks switch which has two terminals, and the LEDs which have two terminals. We're completely uninterested in what the switch is hooked to in this discussion. Hook the positive side of the LEDs together from all your switches. Hook...

Thanks...I do appreciate that you at Dynon have engineered a well thought out product. THANKS AGAIN!!!

I am starting a different thread for this specific topic (I still need the other thread's questions answered). I think careful thought must be given to the feed source of the Dynon remote dimmer...perhaps everyone has been down this road but it is new to me. Pin 25 needs to see a regular, old...

THANKS for the reply and the advice!!! >First, do you have anything else you are dimming at the same time besides the switch LEDs? No...just 8 RockRack switch indicator lights. >If not, use the PWM output from SkyView to dim them. Hook the ground from the LEDs to SkyView, then the positive to...

Dynon Tech Support, Happy Tuesday!!! I know you are busy digging through emails and Forum posts but if you could please answer this question I'd be greatly appreciative

Dynon Tech Support, Happy Monday!!! I know you are busy digging through emails and Forum posts but if you could please answer this question I'd be greatly appreciative

I am trying to integrate a single dimmer knob to control the brightness of both my 8 RockRack switch indicator LEDs and the Dynon Skyview display brightness.  I am planning to utilize pin 26 as the Pulse Width Modulation (PWM) ground for my RockRack switch indicator LEDs as I understand the...

>Beyond that, are you asking if WingX can send a flight plan to SkyView? Well... since I would need the Flight Stream to do what I want to do and since that is too pricey then I guess the question now does SV do any interaction with Wing X? If not then Fore Flight is the answer.

Hi All, I am looking for an app to use for flight planning and flight tracking while enroute. The ideal app would allow me to plan my flight at home (get weather/NOTAMS/file?etc) and then bring it to the airplane and zap it into the SV. I have a Garmin GTN-650 and SV-1000. I have used...

Louis, Thank you!!! Your explanation was very clear and it helped me understand the concern better and more clear than the manual's text. THANKS again for your help!!!

>This is certainly not a question easily answered in the manual--unless I have missed it as well! Exactly !!!THANK YOU!!! The manual was NOT very clear NOR did the text of the manual address my particular question. I was simply trying to make a POSITIVE SUGGESTION for a feature to make the...

n456ts says>I think it's time to note:  Read the manual and know every word before continuing on your project.  It will greatly improve the end result of your aircraft. I am always amazed at how snarky people can be when they are sitting behind a keyboard...I had hoped that this forum was a...

Got it...I will use pins 27/28 for the TIT and 36/37 for the Engine Cowling THANKS!!!

Good info...thanks!!!

Hi all, Here is a product suggestion that I believe will make the Dynon Skyview product even better. !!!If enough users on this forum reply back and say they think it's a good idea, I'm sure Dynon will implemented this idea faster!!! So specifically, Skyview has a widget that can be set up...

Hi All, Great experience shared on this forum!!! I noticed on another post that the RV airplanes have external fans that are wired to the AUX fuel pump. What is the purpose of these fans? I am planning on a panel with dual SV-1000 plus SV autopilot /transponder /radio. The only additional...

>Are you aware that in addition to the 12 thermocouple inputs on the 25-pin connector of the EMS module, there are also 2 thermocouple inputs on the 37-pin connector of the EMS module? If you use those 2 inputs, you would avoid the complexity THANKS for the information.. I have a turbo six...

>You don't want any temperature change across the junctions that you make. That'll show up as errors in the temperature readings So as to try to insulate the thermocouple wire junctions at the switch as much as possible...Perhaps I can wrap the terminal ends that connect to the switch body...