Search results

OK Gents, just to report back and close this topic...The Sensor failed pre-maturely on 250 hours....they suppose to last 10,000 hours ;-) or so the documentation say. This sensor is fitted to a RV10 in the exact location the Vans plans suggest. In the cabin tunnel on the cold side of the...

Morning Guys, My fuel flow readings mysteriously disappeared, from one flight to the next. I downloaded the data onto a USB stick and there was a perfect fuel flow reading on the previous flight right up to the last second of shutdown, but then on this mornings flight after startup zero fuel...

Dynon Support, can you help with any suggestions?

Good Morning, This weekend I updated my avionics Skyview to 13.0 and Garmin GNT650 to V5. The problem i am having is my Skyview map does not display any airspaces any more. I use Jeppesen Africa, since i am in South Africa, and my jeppesen is old since things here don't change often. Can...

Thank you, it is ALTITUDE, and at a quick glance it was +/- 100 ft difference or so, but never more than 200ft. I will run the ADAHRS calibration again, cause I have not done it recently (past year)...and report back my findings after the weekend. Kind Regards Rudi

Support, I have a dual screen duel AHARDS 10" Skyview system. Since I upgraded to Software version 5.x I get an intermittent Altitude cross check error on every 2nd flight or so. It can occur 5 mins into the flight or even up to 30 mins into the flight. Where do i start to trouble shoot...

Affirm i also have a stormscope living in south africa and only way to get wx

Gents, for the most portion of flight I have a stable RPM, with the exception of the full power take-off run 2650 RPM it jumps around a lot. Standard 6 cylinder (IO-540) Lycoming with Mags, and SlickStart, 30K ohm resistor pickup on the P Lead. I want to know about similiar experiences on...

Thanx will try it this weekend!

If I read it correct holding the disengage button for a couple of seconds the skyview indicates csw, but on release of the button it locks on the old heading bug and alt bug. it does not sync to the airplanes current heading and alt? yes I have to ap settings the disengage button on, and set to...

Hi Support, Please check that settings, I tried today, and some of those values are way too high for the skieview and cannot be entered skyview dismiss them...maybe there is a decimal point missing? In addition I am getting a lot of 42 roll servo slip in slight turbulance? Kind Regards Rudi

Does anyone know what the Waypint CSV user import limit and store capacity of the Skyview is? Reason is in South Africa and neighboring Southern African countries we have more than 2000 airports or should i say landing strips and almost all these are typically not in a Jeppesen database. I...

Thank you will try it!

Guys, I am looking for a RV10 skyview autopilot settings for 42 roll servo and 42T pitch servo. If you fly a rv10, pease help, or dynon support let me know. Thanx in advance Rudi

Hi Weasel, Thank you, and YES I can confirm. You are correct 1.5 times for the std 6 cylinder. Rudi

Good day, Had my first engine start and chasing down a high rpm reading. Its a new engine so i dont want to redline it yet 2700, just to get play with the pulse/rev setting to correspond. Being a new airframe and engine combo to myself i dont have a feel for engine sound vs actual rpm... My...

It is a RAM mount too!

I'm so proud of myself, so I thought I'd start this topic. Show us your Skyview Panel for ideas and inspiration for future fellow builders. I'll start, my all amateur DIY home grown skyview panel for my RV10 saw first electrons just before Xmas 2011 and the smoke stayed inside. Sub panel...

Ok, I'll close up my panel now, leave them unconnected. Unfortunate, because now I have to get in their later again when you do release the info. Rudi

Hi Dynon Double bump! Surely it would be a simple answer? Wire directly into audio panel or pass via adjustable resistor? Thanks.